1 / 1
Fluval FX 200mm Spray Bar Outlet w/ Loc-Line style attachments — zdjęcie 1

Fluval FX 200mm Spray Bar Outlet w/ Loc-Line style attachments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An alternate output flow dispersal option for Fluval FX-style canister filters.

Ocena
0 / 5
Polubienia
3
Pobrania
33
Wydruki
1
Wyświetlenia
284
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Share Alike

The parts are a tight fit: be patient. Honestly, I had to sand the male end a bit; perhaps uniformly scaling that part down a fraction of a percent would save post-process time.

I recommend printing the spray bar with the closed end flat on the build plate, and the elbow with the Loc-Line opening flat on the build plate and support enforcement painted on the inner ceiling and underside (the 90-degree overhangs). I used PETG. Good luck!

Tagi