Gridfinity Vertical 3.5" - 7 Hard Drive Storage, Space-Saving
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserted vertically: Gridfinity container holds 7 × 3.5" drives with side labels, optional screw mount and lightweight
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity 3.5" HDD Storage System
A practical and compact HDD storage solution designed to keep 3.5" hard drives organized safely inside standard IKEA drawers — Gridfinity-compatible and optimized for efficient cold storage.
Overview
I designed this HDD storage system because I needed a way to keep my 3.5" hard drives neatly organized inside a drawer — so they had to be inserted from the top. The design follows the Gridfinity standard, but instead of magnets, I chose to use mounting screws, since magnets aren’t suitable for hard drives.
To make backup management easier, I added letters (A–G) on the side to help identify each drive quickly. Rounded and chamfered edges make inserting and removing drives smooth and safe.
The first prototype used a bit too much filament, so I refined the design to reduce material usage and print time while maintaining structural integrity.
Vertical Insertion Version 3x6
This is the improved lightweight version of the original model, optimized for vertical HDD storage inside standard IKEA drawers. Each drive slides in from the top, resting securely without pressure on the connectors.
Container dimensions:
125.75 mm × 251.5 mm (base × length)
- Gridfinity-compatible base (mountable with screws)
- Vertical top-loading slots for 3.5" HDDs
- Side letters A–G for drive identification
- Rounded slots and chamfered edges for smooth insertion
- Optimized internal spacing to save filament and print time
Printing Settings
| Parameter | Setting |
|---|---|
| Material | PLA+ Rapid (Elegoo) |
| Layer height | 0.20 mm |
| Nozzle | 0.4 mm |
| Walls | 2 |
| Top/Bottom pattern | Archimedean chords |
| Infill | 8% Lightning |
| Internal solid | Archimedean chords |
| Brim | None |
| Support | None |
| Speeds | Standard (Elegoo Centauri Carbon) |
| Print time | ~4h 30min |
| Filament used | ~154 g |
Horizontal Insertion Version 4x6
A new variant designed for drawers with limited height clearance. In this version, HDDs are inserted horizontally, making it ideal for setups where vertical space is tight.
Container dimensions:
166 mm × 251 mm (base × length)
- Gridfinity-compatible base (mountable with screws)
- Horizontal slots for 3.5" HDDs
- Side letters A–G for drive identification
- Rounded slots and chamfered edges for smooth insertion
- Ideal for low-profile drawers or horizontal HDD layout
Printing Settings
| Parameter | Setting |
|---|---|
| Material | PLA+ Rapid (Elegoo) |
| Layer height | 0.20 mm |
| Nozzle | 0.4 mm |
| Walls | 2 |
| Top/Bottom pattern | Archimedean chords |
| Infill | 8% Lightning |
| Internal solid | Archimedean chords |
| Brim | None |
| Support | None |
| Speeds | Standard (Elegoo Centauri Carbon) |
| Print time | ~5h 40min |
| Filament used | ~184 g |
Be aware: you can freely adjust parameters if additional rigidity is needed. This print is intended for cold storage — it just sits in a drawer, and drives are removed only occasionally.
Changelog
- 2025-11-10 — Added Horizontal insertion version 4x6 (166 mm × 251 mm) for low drawers.
- 2025-11-10 — Added Vertical insertion version 3x6 (Lightweight) — refined internal spacing to reduce material usage.
- 2025-10-21 — Initial upload: Original Vertical insertion version 3x6.
Notes
I’m currently working on an even lighter, stronger, and more design-oriented version, which will be published soon.
Photos will be updated shortly.