Chair-Holder for Wheelstand Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To use the Wheelstand Pro with an office chair which has wheels, I designed a simple adapter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 2
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
To use the Wheelstand Pro with an office chair which has wheels, I designed a simple adapter. The adapter is used to hold the chair in position especially when breaking on my Logitech G29.
The parts are designed to be printed without support and can be used for the left an right side. I added a M6 x 40 mm screw to connect the two parts. Initially I added two screws, but it also works with one and the distance can be adjusted.
It was printed with 0,15 mm Structural-Profile, 15 % infill and is made of PLA.