1 / 1
14 mm Tapered Joint Stands for bowls, devices or glass. — zdjęcie 1

14 mm Tapered Joint Stands for bowls, devices or glass.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimalist design, quick print holders. Holds a small item or device with a 14mm taper joint.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

Holders designed for components with a 14 mm standard taper joint.

Because the bases are small, stability depends on the center of mass staying mostly above it. Too much off-center weight will make it tip over. To help with this I included an over sized cube version. Print at 100% infill to add weight if needed. 

Tagi