457 modeli
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! This simple device lets you visually see and feel the different sizes and features you would use during 3d building,…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
I removed the case and verified that it is compatible with the Rakuten Hand 5G and Galaxy S23 Ultra. I tried printing with the following settings. ------------------------------ Slicer: Creality Print Nozzle: 0.4mm Layer Height: 0.15mm…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
Lehre für Radien von 01-14mm in 1mm Schritten Print instructions Höhe des Text ist mit 0,2mm angelegt. Ich habe eine verbesserte Version erstellt: https://www.printables.com/de/model/211247-radiusgauge-v2-01-15mm
Socket holder designed for craftsman 1/4" Drive set. Sizes included are 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm. Printed in PLA. If this design was helpful, please consider liking the design on Thingiverse! Check out my other…
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…
This is a Bong/Waterpipe Bowl Holder & Herb Dish - 14mm as the title states. You can put your tobacco, herb, etc in the dish, stand up your bowl, and fill it without spilling anything! 1 version is tapered, the other isn't. This was…
This is a simple temporary support to help install the primary mirror on your Hadley telescope. Can also be a nice stand to install the cell on the mirror and let it cure (~24 hours) before further handling. Very specific, but it was…
Marbles of varying sizes (13.6mm, 14mm, 16mm, 18mm, 24.13mm). Each marble is printed as two identical halves and are held together using a permanent locking pin . No adhesive or supports are needed. The 13.6mm and 14mm marble can be used…
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel.…
A pretty basic tray-type ordeal to stash away bowl pieces for dab rigs & such. I included 4x 14mm post, and 4x 18mm post
this flash hider design is from the designer Hotsauce, that is made for the FGC-9 MKII Stingray edition. that is modded so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.
Print slow and with supports, high infill/multiple perimeters for strength.
A simple ash catcher designed to fit 14mm sliders! It has a size of 70 x 45 x 60mm. The purpose of the ash catcher is to prevent any ashes from going inside of your bong while smoking the end of a bowl. It is an excellent way to prevent…
A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. print settings: 0.2 layer hight should be fine. you can use the 8 layer walls and a 40% infill. but personally I…
I designed this to get my Caddx Nebula Nano into an ImpulseRC Apex 5" Frame. But it should fit into every frame with a mount distance of 20mm. I left 0.3mm of space to make it fit better. It is 19.7mm wide on the outside and there are…
Organization for 1/4 in. drive metric sockets. Has a row for deep sockets, six point and twelve point shallow. Holds sizes 4-14mm (including 5.5mm)
Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…
Similar to EKWB modulus tool, 14mm version. For bending PETG and acrylic tubing for water cooling PCs. Print out of ASA or something even more temp resistant.
print with brim for better adhesion
A simple adapter with smooth inner taper. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.1 Infill: 15 Filament: Generic PLA Black Notes: For best fit, print at highest resolution. Category: Parts
This is a replacement top for the M3 bolt sorter. It's a great design, but was missing a 14mm hole so would mean I kept having to double check the 16mm collector. In the absence of a step file, I've tried to keep this as true to the…
14mm to 19mm adapter for FPV cameras, works for any standard Nano fpv camera. No need for any sort of supports or a brim. Tested on my runcam split 3 nano, had some crashes and shows no signs of wear. Included v2 : Is a little beefier…
This is the best way I could figure to mount a O4 Lite camera in a standard 14mm camera slot on existing frames. It won't work for all but should be a good stop gap until better is designed and new canopies are out. The weight with the…
I'm re-designing it because I needed a 14mm CCW inside.
I couldn't find a socket holder I particularly liked that also had magnet holes in the gridfinity base, so here's mine. Holds shallow and deep 4-14mm sockets. I used Husky brand sockets (Home Depot) for measurements but there is a bit of…
A small box for electronics projects with 6mm diameter wire holes on each end. The top and bottom friction fit together so no glue is required. Outside dimensions: 55mm x 35mm x 14mm Inside dimensions: 52.5mm x 32.5mm x 11mm
Adapter to use a Dynavap model M with a 14mm water bong. Print with a semi hard TPU to allow the vape to snap into the adapter and form a decent seal. The hole in the adapter can be aligned with the carb to function as a normal, or rotate…
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
A quick printing collimation ring. Prints in under 10 minutes and weighs under 5g. It's raised so only the 3 corners should touch the surface of the mirror. The inner ring is slightly larger than the secondary holder, making it easy to…
Cyma Glock 18C Tac Rail and 14mm CCW Barrel
We needed some bowl holders for our display cases at work. So I decided to make one that didn't take days to print. I went through several different dimensions in the piece that grips the glass bowl. I went with a 2.5 degree angled hole…
The original model didn't fit properly on my rack so I tweaked it. I made the overlap between the frame and the bar parametric so you can easily adapt the part to your needs. The fusion parameter is called “RACK_OVERLAP_WITH_BAR” Have fun…
There are two versions, one with knurling and one with out. Recommend using a brim.
Nut hole size 15mm, bolt size 14mm. overall size of the nut 23mmx20mmx8mm. overall bolt size 23mmx20mmx30mm.
Each chain can be printed seperately and fitted together. There is also a 6 piece variant that can be printed in place.
( this is a mirror of my original cults3D listing ) Use these donuts to step-up your lenses for your 114mm mattebox, like the smallRig 2660 or my very own Kompi v3 For now there are a few sizes (the rainbow-screenshot doesn't get updated…
This is a thread cap (protector) for airsoft rifles (AEGs). It could be screwed on the threads whenever you are not using suppressor or flash hider. It has 14mm CCW thread (left-hand). Total height: 11mm Diameter: 25mm The idea behind…
Source File available https://cad.onshape.com/documents/020fa78cdb4bd31437287ea9/v/11a678e5a4a28bbc66dad17e/e/6afdce6ade2869a5bee4ac25?configuration=List_byYdtnejsYAES6%3DMX&renderMode=0&uiState=69188d63bcdba092b7d63574
I got the idea from Novritsch Modular Suppressor V2. Made it to fit in the holster with a pistol. This is 10cm long and it's threaded in 14mm CCW. Holes for M3 bolt and nut to tighten it well in place. This is for looks only! I printed…
Airsoft Muzzle device inspired by the infamous Muzzle Device used on the XM177E2. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.15mm Layer Height 100% Infill If you need anything, feel free to…
I loved the original model but the recessed text makes it really difficult to paint or do multi-colored prints. I removed the recessed text and replaced it with raised text for easy multi-colored prints.
Design and Use This adapter allows you to combine Storz & Bickel Easy Valve Balloon with a water pipe that has a 14mm female fitting. These balloons are used with Storz & Bickel Volcano Vaporisers, they're pictured here with a Sneaky Pete…
last update 24.02..2025 Hello and welcome to the second iteration of my modular silencer with different skins. If you like you can tip me via paypal: https://paypal.me/crazYm1nd ---------- description This is a complete refactoring of the…
Introducing the Ash Catcher, the ultimate solution for easy ash disposal after smoking. This ash catcher features a convenient unscrewable compartment, making cleaning quick and effortless. Its minimalist design makes it a stylish…
I made some 14mm bowl multiplier, because I saw a glass one and I wanted it! So I made it. In testing of the quad/dual I found that the bowl multipliers can be too close to your face because of the height they add to your down stem. To…
2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.
!! You need to print it Upside down!!
A remix of the US version reducing the height from 20mm to 14mm for faster printing and reduced material usage. Chin piece file included.
Intention was to have a tire for my gravity autorewinder (MMU). Could buy from Lego seller, but why not make my own tire. Printed in different hardnesses: Blue = TPU 85Sh(A) Black = TPU 60Sh(A), printed at 20-25mm/sec MAX! Red = TPU ca.…
An adapter enabling you to use a 14mm bowl with a 18mm downstem. I looked everywhere online and could not find a proper one, so I made this one. It's my first upload, so if it doesn't fit your downstem, please comment and I'll try to…
Gridfinity Socket Holder for Dewalt Metric Sockets, Size 4-14MM, 1/4 Inch Drive 1x6 Gridfinity Grid These sockets are part of a set of Dewalt sockets purchased from Costco circa 2019.
Gridfinity-compatible M3 Bolt Sorter Top - Including 14mm remix. Now fits the Amazing Gridfinity M3 Bolt Sorter
Skoda logo replacement for remote control key - 14mm diameter. Used on Skoda Octavia I (1U5). Printed in 2 colors. It is really small - put more files on the bed - like 4 or 6. I have also included little shins to make the key blade…
this is Mk2 of my ash catcher design, now there's a 90degree & 45Degree models with 3 Different sizes for the ash compartment.
I made this adapter to fit my O4 Air Unit camera in the Betafpv Micro Canopy Lite (the Meteor series canopy). It fits with the tiny self tapping screws, but there isn't much room for changing the camera tilt. I then solved this issue by…
“The Bahtinov mask is a device used to focus small astronomical telescopes accurately.” This thing is essentially used for astrophotography to get things in focus using diffraction. The short and sweet is that you stick this thing on the…
I created this model to help place a hole reinforcement label at the centre of a 114mm telescope mirror like the one in the fantastic Hadley telescope created by Maff here .
[EN] Airsoft MK18 Mock Suppressor / Silencer (14mm CCW) Custom tactical mock suppressor designed to fit the MK18 airsoft replica. Features a standard 14mm Counter-Clockwise (CCW) thread, making it fully compatible with most M4/AR15…
Little rack for 4 14mm bowls. Yes that is the dirtiest banger you've ever seen
I made these designs to bend my hard pipes for my pc water cooling, they are 90° and from a R14 to R20 to R30 ( to make a more gentle curve) I made mine from petg and they survived the whole pc building.
This is an improved model based on lessons learned from my 2-½" battery charger pegboard mount ( here ) This part will slip into US pegboard (1inx1in) and has two pegs on the opposite side to fit into the mounting holes on the bottom of a…
Muzzle device inspired by the distinctive Noveske Flash Hider. Both parts go together by a press fit. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.1mm Layer Height 100% Infill Recommended Print…
Holds 14mm bong bowl and catches herb Prints with no Supports Print Settings Supports: No Resolution: dynamic Infill: 20 Filament: ANY PLA ANY Category: Tool Holders & Boxes
A bahtinov mask for Samyang 14mm lens. Should fit quite snuggly on the lens. made with https://skeye.rocks/tools/mask/
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
I really like the original design by Fabio Ornellas but, my laptop is 17mm thick on the bottom which obviously wouldn't fit in the 11mm opening. I opened up that gap to 18mm and shortened the overall depth so it had a smaller footprint
das ist mein erster Make, bei Problemen oder Fehlern schreibt mit bitte das ich was anpassen kann. ich empfehle das ganze in etwas festerem tpu zu drucken. die Konen haben alle eine 2,5mm Fassung für Standard 2,5mm Carbon Stangen, um mir…
Quick release FPV Pod that you can mount to different models. Just install the "base" and wiring to the FC on your models and fit the FPV Pod to the model in current use. Compared to the pictures the locking system has been improved and…
Adapter für Barrel Extensions oder Silencer. Passend beim ASG McMillan M40A3 Sportline Bolt Action Snipergewehr sowie Ge
Combination Pistol Grip and Flashlight holder on one rail positioned for easily turning flashlight on and off with your thumb Flashlight mount holds ~14mm diameter flashlight Print Settings Printer: Prusa i3 Rafts: Doesn't Matter…
14mm ccw treads and a suppressor with removable front cap for well r1 uzi Category: Toy & Game Accessories
A few sample holders are found on here and other websites but nothing that allowed bottles with a diameter of 14mm. I decided to take inspiration from the designs but make it from scratch so I can later adjust it for different bottle…
This adapter allows one to use an HDZero Lux camera in a common 14 mm wide FPV camera mount, eg. compatible with a Happymodel Crux3 canopy, plus many others. The photographed samples were printed by JLCPCB in PA12 on their MJF printers.…
Decided to model a glass on glass (joint) clip for my Grav Labs 14mm reclaimer adapter so I would have a spare or two. Instructions raft and support recommended. printed @ 0.20mm, 2 perimeter shells and 40% infill Category: Other
Print with the out side face of the wheel down with support for the outer tire lip and center face only. Wheel face grove doesn't need support. 15% infill is plenty with 3 or 2 wall loops.
This guy let's you connect your XMax v3 pro to any glass piece that accepts a 14mm bowl. Printed in TPU so the vape is held snug but easily removed by tilting to the side
Big shoutout to w0rkfl0w for helping me with test prints ;D I made this 14.4mm inside. The design is based off of my first one which was alooooot of trial and error. This one went more smoothly though ;) Tolerances are 0.2mm so print this…
I designed these for the Syil X7, but suspect they will work for any 14mm t-slots
Disclaimer: This mod requiring you to remove the cover of your AC power supply and you will need to deal with AC power wiring. If you don't know what you're doing I strongly advise to get help from experienced electrician. Risk of fire…
RC car wheel hub, 14mm, for HPI Bullet. Should also work for other RC cars using similar drive technology. For best results, print solid or with high infill. From PLA worked fine for me, but PETG or Nylon could be more stable.
Eng: Metric drill bit holder for 1-14mm drill bits with different angles. Fusion 360 file is also added. Feel free to make new remix. Ger: Metrischer Bohrer Halter für verschiedene Spitzwinkel. Die Fusion 360 Datei befindet sich ebenfalls…
This is a remake of the pipe bending tool from EKWB.
Canopy for Toothpick or whoop style quadcopter. Supports 14mm camera Category: R/C Vehicles
I wanted a cutting jig to use while building a hard-tube watercooling loop in my PC. This jig is designed for 14mm OD acrylic tubing and has extra material at the bottom so it can be locked into a bench vice. The cutting channel is 1mm…
My Newtonian Telescope design featuring a 4.5inch 114mm mirror shown here with a 900mm focal length. Super simple to build and designed with so many adjustments there are no mistakes you can't compensate out of the system. Uses very…
This is an adapter for Umarex UMP so that you can use 14mm ccw muzzle devices such as suppressors found here on printables. It's made so that the muzzle device is locked in place with both outer barrel slot and printed lock piece. The…
Well, a simple, elegant, cheap, fast printed and useful hook for 10mm, 12mm (1/2 inch) and 14mm steel rail handles that can be found in many kitchens and bathrooms. Designed to be snapped onto the rail with the smaller opening so that it…
I made these to cap the ends of the tubing for my Hadley telescope . They dress up the tubing and cover up any sharp edges. They should work on any ½" OD tubing. Print with no supports with a layer height of 0.3mm
Adapter for airsoft silencer to fit 14mm thread Category: Sport & Outdoors
Quick adapter for Dremel for soldering Iron for Heat inserts for soldering iron diameter 14mm and larger. Printed with PETG with 5 outer layers and 60% infill to eliminate it from flexing and layer height 0.16 mm to cater for the thread,…
I didn't want to spend $40+ on a bending mandrel to use for 4 tubes one time, so I drew this up quickly. There are bends for 90 and 45 degrees, as I figured 180 wasn't that commong anyway. It's set for 14mm OD tubing. Smaller should work…
Simple airsoft barrel exention of 6 cm
TPU 14mm grommet Downstem: https://www.printables.com/model/446187-downstem-for-water-pipe
(tpu recomended, might to adjust sizing for rigid plastics) A lens cap is an essential accessory for any camera lens to protect it from dust, scratches, and other environmental elements. A 3D printed lens cap for a 14mm Rokinon lens…
Self-designed and tested.
I have been dreaming about a nice and stable shoulder rig for quite some time now. I've finally decided to make one myself, in 3D and sharing the design and adding new features as time pass. I really like gadgets... and i want to add…
