Honeycomb 14MM CCW thread Airsoft suppressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Airsoft Rifle Suppressor for 14MM Counter Clockwise threaded outer barrel
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 462
- Wydruki
- 3
- Wyświetlenia
- 2139
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey all,
Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length so you could run an extended inner barrel through it if you wanted. as its only a 3d print depending on what filament you print it with strength will vary so don't put all your hope in it protecting a shiny new extended barrel.
Make sure you print it with the threads at the top for maximum stability on the print bed
Print settings:
- No supports needed
- 0.15mm layer height
- 195C print heat
- 0.25mm bottom layer height
- 60C bed temp
- Printed on a AnyCubic Kobra 2 NEO
Going to make a shorter model at some point and add it to this model if its wanted as this one is quite long. Please leave a comment with any issues or things I could change to the print and or the description.
Thanks all,
Ed
Update's
- (07/08/24) Just uploaded the short version of this suppressor that extends the length of the rifle by roughly 75MM for those of you who don't wont a super long rifle.