Honeycomb 14MM CCW thread Airsoft suppressor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Airsoft Rifle Suppressor for 14MM Counter Clockwise threaded outer barrel
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 462
- Makes
- 3
- Views
- 2,139
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
Hey all,
Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length so you could run an extended inner barrel through it if you wanted. as its only a 3d print depending on what filament you print it with strength will vary so don't put all your hope in it protecting a shiny new extended barrel.
Make sure you print it with the threads at the top for maximum stability on the print bed
Print settings:
- No supports needed
- 0.15mm layer height
- 195C print heat
- 0.25mm bottom layer height
- 60C bed temp
- Printed on a AnyCubic Kobra 2 NEO
Going to make a shorter model at some point and add it to this model if its wanted as this one is quite long. Please leave a comment with any issues or things I could change to the print and or the description.
Thanks all,
Ed
Update's
- (07/08/24) Just uploaded the short version of this suppressor that extends the length of the rifle by roughly 75MM for those of you who don't wont a super long rifle.