Counting matching models…
This is only guaranteed to work with 16oz white monster energy cans due to some flavors being different sizes. You're welcome to try others but don't say I didn't warn you. Make one cut around the can (I've found that the best/easiest…
Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…
Alternative airgun suppressor Snowpeak/Artemis M25 Thunder Black .35 caliber . 5x baffles for 1x suppressor body.
Remix of 2 supressors for handguard maked by Miki
I wanted to add a suppressor to my G&G LevAR, and was inspired by the QR suppressor my son has for his VFC MP7. I printed it using PETG-CF, because I liked the finish. It did add some challenges because of the snug fit of some of the…
This is a functional airsoft suppressor that fits right on top of 25mm OD flash hiders. One version has a large opening and the other has a much smaller hole for better suppression. Both have a removeable orange tip. Be sure to follow us…
suppressor FOR KALASHNIKOV ASSAULT RIFLE OF THE M SERIES FOR AIRSOFT. THE THREAD DIAMETER IS 14.5 MILLIMETERS. I DID IT MYSELF, USING THE SILENCER FROM THE GAME AS AN EXAMPLE.
Silencer for barrel cover and stock for m4/ar15 created by me. Silencer for m14 ccw thread, must be enlarged in X and Y axis by 2% so that the fit is correct. I used m3 imbus screws with a length of 20mm.
This mod to the Lightning Blaster Pro allows you to quickly swap suppressors and/or flash hiders. This mod involves no cutting of the blaster shell and can be accomplished in about thirty minute. If you would like to build the MFG (muzzle…
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
**WARNING**: THIS IS VERY SHARP AT THE FRONT OF THE BARREL. KEEP ALL SENSITIVE BODY PARTS AWAY FROM IT. **NOTE** THIS IS FOR THE 12 BCAR VARIANT OF THE ZNC AUS. YOU WILL ALSO HAVE TO PAINT IT.(unless you have ams and set a color change)…
Suppressor adapter for Umarex Walther CS88 pellet airgun. Suppressor thread 1/2"-20 UNF, same as Huben suppressors.
airsoft purpose only why its 2 model separate for reduce some filament like Can printed with PETG Thread printed with PLA+ and glue together
I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…
Suppressor For Dart Zone max Dictator I used Pet-g pretty good If it doesn't work your nerf gun is making noise from spring oil and not good sealant so apply lube. gd luck twin
3D model description Inspired by the Knight's Armament Company QDC Suppressor Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders its in two pieces so you can stuff it with whatever you want to make it more effective…
3D model description This Model is inspired by the PBS-4 Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders New thread, 24mm x 1mm right VFC Version 24mm x 1.5mm right Dimensions: - Length: 181mm - Widest Diameter:…
Bodykit designed for the CTM AP7 kit on the AAP01 platform. Both a version designed for sound suppression and amplification are available. General The kit mounts via a locknut that is screwed onto the stock AAP01 barrel. This uses the…
A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Tec-9 shadow with a suppressor - Gun Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print…
suppressor FOR KALASHNIKOV ASSAULT RIFLE OF THE M SERIES FOR AIRSOFT. THE THREAD DIAMETER IS 14.5 MILLIMETERS. I DID IT MYSELF, USING THE SILENCER FROM THE GAME AS AN EXAMPLE.
I wanted to add a suppressor to my G&G LevAR, and was inspired by the QR suppressor my son has for his VFC MP7. I printed it using PETG-CF, because I liked the finish. It did add some challenges because of the snug fit of some of the…
Airsoft / Softair A2 Muzzle flash suppressor M14/1 Slotted at the top, closed at the bottom to prevent dust turbulence when shooting from a prone position. I also Upload it on Cults
A longer suppressor-style barrel attachment for foam blasters with a standard barrel attachment point. The wide inner diameter is intentional — designed to give darts full clearance so the attachment never contacts or interferes with…
RECOMMENDED SETTINGS: 3 wall layers 25% infill no supports needed
NOTE: The revised version fixes a few minor errors and adds additional vertical support. These were designed to allow you to mount multiple suppressors of varying calibers to different surfaces including walls, safe doors, etc… These…
This is a low profile clamp wrench for Rugged Suppressors center fire rifle locking collars. This will work with Surge, Razor 556 and 762, Micro, and Radiant models and their new RUM HUB adapter. This is a remix starting with a trace of…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
18-5-2024 there is a small end front cap added for the P9 suppressor for short P6 SD shrouds ________ to be clear this are not made to be functional pieces, just to hide the inner barrel of your airsoft replica. with that said this new…
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. 9mm id for optimal extended barrel support
Designed to fit over each end of the CyberPower Model 880 surge suppressor. Mounts with four #6 screws to a flat surface. Prints without support. Printed with 3 perimeters, 10% triangle infill, oriented with flat side on print bed. Modem…
Just a dinky little side project that I thought would be neat. I designed this for my own personal scattergun, which is the TS version. This thing should fit fine on most of the scattergun variants, though I'm not entirely sure if it will…
This is a very simple MOCK airsoft suppressor i designed for very specific reasons. i have a cyma standard ak 105 carbine. CYMA Standard Stamped Metal AK-105 Airsoft AEG Rifle with Synthetic Folding Stock (Package: Gun Only), Airsoft…
Silencer for barrel cover and stock for m4/ar15 created by me. Silencer for m14 ccw thread, must be enlarged in X and Y axis by 2% so that the fit is correct. I used m3 imbus screws with a length of 20mm.
Short, stubby and hexy suppressor. Bit of a play around in Fusion, someone might want it :) 14mm ccw thread. Print without supports at whatever settings you fancy, rafts not required.
The original file for this suppressor had issues where the inner diameter was too small for a 6mm BB to pass through. This file has a larger inner diameter as well as a larger overall body with support for 14mm CCW threads. This…
A bit niche, but this file is for a mount for wadsn style torches that mounts to the suppressor of an airsoft ak74u. The knurling inside helps grip. I'd recommend a strip of tape (electrical or duct) over the countersunk screws to stop it…
The idea was the Arcturus karambit series which have this kind of suppressor. I'm not sure how the original is designed regarding it's length, holes etc. but i wanted the look to be simmilar so that's why it has a 25 mm “countersink” (as…
Bei 15cm Druckhöhe hat der Halter einen Innendurchmesser von 6cm. Die Aussparungen für die Magnete sind in der aktuellen Version für 20mm Durchmesser und ca. 5mm dicke Magnete gemacht. In der Mitte hatten meine Magnete ein Loch, das ich…
Custom suppressor with 14 mm ccw thread and inner structure. This suppressor changes the sound of your FireHawk but won't decrease the fps (tested on a HC-05 with 0,5 J) Angled grip: https://www.thingiverse.com/thing:2939218 Bolt catch:…
16 CW suppressor with foam insert compatible. Works with SSX23 or Mk23! A Few Things to Note: - Used Electrical Tape to hold pieces while glue set. - Compatinble with the Novritsch Ghillie Suppressor Cover - Uses 4" foam paint rollers as…
The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter…
This is an airsoft suppressor for a p99 airsoft pistole please print orange. PLEASE LIKE :) ;)
Couvre Silencieux Suppressor Cover Diamètre Intérieur +0.15 Diamètre Extérieur sur toutes les versions = 57.1mm
i use 180ml can not (not sure about can size) thread 14x1mm ccw recommand setting is wall 100 💪
Hey Folks, I recently designed a suppressor holder, which I would like to share with you. This holder is suitable for suppressors with 50 mm in diameter. The mount fits in every gun cabinet with hook mounts about 10 mm high, 14 mm wide…
3D model description I designed this suppressor for 14mm CCW threads. This one works with internal foam. You can buy pre-cut foam for 5 EUR at: https://eu.novritsch.com/product/foam-discs-modular-suppressor/ It prints in 2 parts, a thread…
This mod to the Lightning Blaster Pro allows you to quickly swap suppressors and/or flash hiders. This mod involves no cutting of the blaster shell and can be accomplished in about thirty minute. If you would like to build the MFG (muzzle…
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Safety Note : Always wear appropriate protective gear, including eye protection, when using airsoft weapons to prevent injuries. Use Caution :…
Acetech Brighter R Tracer Adapter for the Jaeger Precision STFU Mock Suppressor Designed for a 11mm right hand to 14mm adapter that the tracer screws onto
NOTE: 09/21/2025 G3 and G4 holsters for suppressor height front sights up to 10mm added. This is a pair of open bottoms TPU holsters for the Gen 3 and Gen 4 Glock 19. It will fit pistols both with and without a TLR6 tactical light. It…
The front cap of the A-TEC CMM-4 rimfire / airgun suppressor is hard to remove for cleaning especially after lots of use. I did create this simple tool to unscrew the cap easier. I'd recommend setting the infill to a higher setting to…
Print a set of these models and one of your preferred Silly Spigot Nut . You can use 1-½"x3/8" insulation pipe foam to fill the void
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
Suppressor with a honeycomb pattern. The STL file includes an M14x1mm thread, 13 mm in length. The thread pitch can be modified using the provided Fusion 360 file.
Replica Glock-18 found here → Click Me The suppressor isn't modeled after any specific IRL suppressors. It's meant to be simple. Installation: Slide the suppressor into the barrel. The side with the rifling will go into the barrel and use…
I made a two piece suppressor holder for variable sizes of suppressors. print it with the ring down for the best result without supports
The suppressor must be stored in an upright position to allow corrosive gases inside to dissipate. These suppressor racks are designed to ensure proper air circulation. They are mounted onto metal shelves in a cabinet.
Dometic Brisk AC duct for the old version (DuoTherm/ Brisk) that actually directs the airflow to the ceiling ducts, instead dumping into the plenum area, and leaking into the surrounding area, or back into the evaporator. This is a work…
suppress this! this project is still in development and will receive regular updates. an acar rifling barrel with a shr
This mock suppressor is compatible with the SMG body kit by XFoxGames. You can purchase that kit separately here . The micro stock should be compatible with hollow buffer tubes. The one I have pictured is a folding stock from Evike, but…
Air rifle moderator, for use with sound dampening felt or foam . 193mm overall length, the tube is 185mm long, 40mm outer diameter, 36mm inner diameter, each cap extends 4mm out of the tube. Inspired by the many aftermarket designs that…
Silencer adaptor for use with Weihrauch HW40/Beeman P17. Fits 1/2-20 UNF threaded moderators. Held in by friction. The options to use a suppressor with the HW40 were limited. This works pretty well. Only issue is that when attached, a…
Just playing around and made a mock suppressor for the HC Diana. It's pretty large but it will give you some tacticool points! Tactics!!! I recommend printing this or at least the threads at .12 to .08. I used support but your mileage may…
This is a custom designed suppressor mount that I saw in the gunsmithing subreddit. Designed by u/VernoniaMW. To create this model, I used a sketch and a set of coordinates that u/VernoniaMW included in his post. I've never modeled…
So essentially I took a basic can lid model and modeled a hole into it. Then, I merged it with a model for an airsoft flash hider. This should fit anything with 14mm CCW threads and any 12oz soda can/ monster cans.
Threads right onto the original TKO barrel extension to cover the clip.
RU " Suppressor " - первая на данный момент созданная модель для настольной игры "Steel wind project". На данный момент игра только в разработке . Правила будут опубликованы в последующих моделях, а пока наслаждайтесь самой моделью) ENG "…
Thread Board Anker 351 Surge Suppressor Mount, modified version of Daniel Rowland's mount Printed in Elegoo PLA-CF Printed on Elegoo Centauri Carbon Wall Loops - 6 Top Shell Layers - 6 Bottom Shell Layers - 5 Infill - 20% 3D Honeycomd…
This is a mock suppressor made specifically to fit the Umarex Airsoft H&K USP .45 and is very likely to not fit any other airsoft handgun. I have included 3 different models. MK3 is the final completed model and fits very well and snug.…
this doesn't actually “suppress” the sound of the gun, it is mainly for looks and the ability to put a flashlight on with the picatiny mount. print settings: -.15 hole expansion compensation 50% infill supports on
The Hare Tech Diana 2025 Cosmetic Suppressor is an oversized, cosmetic replacement muzzle cap for the latest updated edition of Hare Tech Diana Brushless Flywheeler. Featuring similar knurling to the original anodized aluminum part and…
This model i made to fit over the muzzle device of an hk airsoft rifle its pretty basic and have yet to see if it fits the way i want it to. May be adding updates here shortly. I have uploaded both the print file and the stl file if you…
Designed a holder for a suppressor with a diameter between 50-55mm. In the back are 6 holes for 15x5mm round magnets. Can be printed standing as seen in the picture. 4 Magnets should be enough. If the suppressor is heavier maybe use all 6…
The Manta-MS (mock suppressor) was designed with easy printing and function in mind. All models are print oriented and require minimal support. Multiple versions and sizes to fit a variety of blasters. PCAR version increases accuracy by…
not much to say really. just a super basic suppressor. Has a 14x1 CCW thread. Thread it on the first time by pushing it onto the threads. after that it should come off and on fine.
WARNING: THIS DESIGN IS UNTESTED I hope you all enjoy this paintball suppressor the ,forbidden popsicle, it fits barrels 23.7 mm in diameter. The name comes from Dirty Civilian's recent suppressor video and after hearing it, I thought it…
Custom Mock-Suppressor for the ASG Airsoft Scorpion Evo Has space for a tracer, with different length shells for different Acetech tracers with a max Diameter of 31.8mm It will not fit a regular Evo Handguard and needs a clearance of 37mm…
This is a prop suppressor this will not make any noticeable difference. It does not have any threads but you will manually make them by putting it on it Category: Accessories
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…
An adapter to mount common 14mmCCW parts to an airsoft MP9. Tested to fit on KWA.
Can be used on any blaster that takes the EX BCAR rev 2 and has the exposed barrel space behind the bcar to accommodate the suppressor. Replaces the “DecoRing” part of the BCAR. Four versions are available: Regular for Classic BCAR…
This is a barrel extension (mock suppressor) designed to perfectly fit the M-LOK Handguard by Miki, for the MOSQUITO Beta V2 by HYBRID ARMORY. This will fit on your M-LOK Handguard, and most airsoft guns on the market, without…
A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…
This “Suppressor” barrel is perfect for any low profile builds with not much going on except the fillets. The 2 rails are just screw-in rails that I used sourced materials for. This pairs perfectly with my “Bottom Stock Mount” for the…
Supressor for .22 Longrifle treaded ½-20 unf and ½-28 unef. if you want looser tread try x-y 101% Printed in Petg Testshots approx 500rd Cci Standard in Brno Model 2 (cz452/455/457) without any issues, even testshot with Cci Stinger, no…
Used pla and petg recommend either depending. V.2 is smaller and has a better mesh for strength and printing.
Disclaimer: I have zero experience 3D modeling, so I just took files I liked and smashed them together. I took BanBot2's short dart barrel mod as a base, replaced the barrel with Toukejin's printed barrel w/ rifling, and then shoved it…
A Fat short rectangular suppressor/silencer made specifically for my 250% Glock model.
Let's say you recently purchased an " Amazon Basics Surge Protector Power Strip with 2 USB Ports, 6 Outlet Extension Cord, 1000 Joule, Rectangle, 6 ft Cord Length, Black " to protect your printer, and you have an Original Prusa Enclosure.…
