1 / 3
L96/MB01 suppressor adapter (airsoft)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft…
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 602
- Makes
- 0
- Views
- 2,077
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Why
My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping.
Features
- Pre-modeled threads. The thread pitch on the L96 side isn't perfect, but that does make it fit rather snugly.
- Fits my MB01, but should also fit the MB08 and other Maruzen clones. Possibly even the MB44 series.
Instructions
- Print it in PETG with multiple walls, slow speed and little cooling to get the strongest part.
- No supports required
- .2mm layer height is just fine.
- If it doesn't fit, your printer calibration may be off. Try printing it at 99 or 101% scale if this is the case.
Open Source
As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!
Category: Sport & Outdoors