1 / 3
L96/MB01 suppressor adapter (airsoft)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft…
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 602
- Wydruki
- 0
- Wyświetlenia
- 2077
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (49)Powiązane
Why
My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping.
Features
- Pre-modeled threads. The thread pitch on the L96 side isn't perfect, but that does make it fit rather snugly.
- Fits my MB01, but should also fit the MB08 and other Maruzen clones. Possibly even the MB44 series.
Instructions
- Print it in PETG with multiple walls, slow speed and little cooling to get the strongest part.
- No supports required
- .2mm layer height is just fine.
- If it doesn't fit, your printer calibration may be off. Try printing it at 99 or 101% scale if this is the case.
Open Source
As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!
Category: Sport & Outdoors