104 modeli
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel.…
this flash hider design is from the designer Hotsauce, that is made for the FGC-9 MKII Stingray edition. that is modded so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.
Print slow and with supports, high infill/multiple perimeters for strength.
A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. print settings: 0.2 layer hight should be fine. you can use the 8 layer walls and a 40% infill. but personally I…
Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…
print with brim for better adhesion
I'm re-designing it because I needed a 14mm CCW inside.
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
Cyma Glock 18C Tac Rail and 14mm CCW Barrel
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Extendet 12mm thread, I had problem with durabilyty in this place. Slightly shortened 14mm thread, didn't fit my tracer unit. This is my first work with threadet think in 3d programm, so don't except something excellent.
This is a thread cap (protector) for airsoft rifles (AEGs). It could be screwed on the threads whenever you are not using suppressor or flash hider. It has 14mm CCW thread (left-hand). Total height: 11mm Diameter: 25mm The idea behind…
I got the idea from Novritsch Modular Suppressor V2. Made it to fit in the holster with a pistol. This is 10cm long and it's threaded in 14mm CCW. Holes for M3 bolt and nut to tighten it well in place. This is for looks only! I printed…
Airsoft Muzzle device inspired by the infamous Muzzle Device used on the XM177E2. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.15mm Layer Height 100% Infill If you need anything, feel free to…
last update 24.02..2025 Hello and welcome to the second iteration of my modular silencer with different skins. If you like you can tip me via paypal: https://paypal.me/crazYm1nd ---------- description This is a complete refactoring of the…
Hello there, As i really liked my SRS i have tried my luck with Gas Sniper, a classic, WELL G96 (ARES AW338 Compatible) which have some non-standard solutions for todays airsoft standards. First model which i have designed is simple 14ccw…
My Silencer from the Daisy 881 with a M14x1 counter clockwise thread. Also a short version for lower powered air guns or softair guns. You can use the test print file to test the fitting with your printer settings with minimal material…
!! You need to print it Upside down!!
[EN] Airsoft MK18 Mock Suppressor / Silencer (14mm CCW) Custom tactical mock suppressor designed to fit the MK18 airsoft replica. Features a standard 14mm Counter-Clockwise (CCW) thread, making it fully compatible with most M4/AR15…
fits nice. made on a resin printer but should work fine on other types.
Muzzle device inspired by the distinctive Noveske Flash Hider. Both parts go together by a press fit. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.1mm Layer Height 100% Infill Recommended Print…
Waterproof bottles with o-ring 62mm high bottle and 42mm small bottle, both with 26mm diameter and use the same Lid with reverse screw antikids , counter clockwise CCW, with sealed O-Ring. Im printed it in PETG and TPU.
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
14mm ccw treads and a suppressor with removable front cap for well r1 uzi Category: Toy & Game Accessories
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
I liked the dust collection hose adapter @ter_251579 made, but I wanted a threaded section for the hose connection end so I could thread my hose instead of using hose clamps. I used another model of a 4" CCW threaded adapter and scaled it…
This is an adapter for Umarex UMP so that you can use 14mm ccw muzzle devices such as suppressors found here on printables. It's made so that the muzzle device is locked in place with both outer barrel slot and printed lock piece. The…
The suppressor is 7" long and 1.3" (34MM) in diameter. I printed with %25 infill (Grid). No supports needed! Enjoy and leave a comment if you print it!!!! *Sorry i don't have the best pics for this model * This is free for you to print,…
Simple airsoft barrel exention of 6 cm
Self-designed and tested.
Einfacher und schnell druckbarer Adapter von UNF auf 14mm CCW
Remix of the Russian style flash hider for airsoft by H3mpp4, https://www.thingiverse.com/thing:2376386 , made it shorter and uniform width. Made to fit the bespoke airsoft short outer barrel for ares striker
The thread on my brand new silencer did not fit all the way down on my airsoft weapon. So i made a simple adapter 14mm CCW to 14mm CCW
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
Updated with better modelled threads and nicer knurling. Now works better with FDM. This a printable adapter for the G&G UMG airsoft replica. It exist because the name brand metal ones cost $50 shipped and that is unrealistic for me, so I…
Found a pretty good A2 birdcage flash hider on Thingiverse, but it doesn't actually seem to have the correct threading, so I edited it and added the 14mm CCW (M14x1 LH) threading that's on most airsoft replicas you would want to put an A2…
Another take on the Loudener design from the Simpsons. Print upside down without supports. Scale if the threads are too loose or tight. The design is based on the tractrix profile to better direct and amplify the pew pew sounds. The…
My first upload. This may prove useful to other people :) Adaptor to fit a Xcortech XT301 tracer unit onto a Raven Hi-Capa 5.1 GBB airsoft pistol. Other pistols with a 12mm CCW female thread may also fit. The screws, LED and push button…
KJW M700 Barrel to M14 CCW Thread Adapter Fits (snugly) over the unthreaded KJ Works M700 Rifle and adds M14 CCW threads for threading on muzzle devices (E.g airsoft tracer). I made the sleeve that fits over the barrel long so it covers…
threaded adapter to convert the 12mm clockwise thread nuprol likes to use to a more standard thread. I used it to put an Acetech Blaster C on a Nuprol Raven R92F. lay flat in slicer before printing.
For an muzzle device with 14mm c/cw
This adapter replaces the outer barrel of the airsoft replica Arrow Arms APC9. I created this adapter to be able to use most 14mm ccw muzzle device attachments for airsoft on the market. Flash hiders, thread protectors, muzzle breaks,…
It will fit the 14mm CCW thread. 32mm outer diameter. To be printed vertically on front, without support Some materials have different shrinkage factor, and and printers have different flow settings, please make sure that your printer is…
This is a remix of a remix. The original Matty's Gel Ball Hop up (don't think it's available anymore) was remixed to add a 14x1.5 counter clockwise thread. I have remixed it to add M6x6mm threads to adjust the hopup and to sceure it onto…
3D model description This is just a simple little thread adapter for the DINORODUCTIONS Silencers, it is 14mm CCW to 24mm CW Dimensions: - Length: 15mm - Widest Diameter: 24mm !THIS IS FOR AIRSOFT OR MILSIM ONLY! (U CAN USE IT FOR…
Time to share some stuff! I thought about a silencer / suppressor adapter for the really cool DeSteiner 1911 -> https://www.printables.com/model/1446099-desteiner-colt-m1911-mechanically-working-prop-gun Here I have 2 versions (short and…
This is a barrel extension (mock suppressor) designed to perfectly fit the M-LOK Handguard by Miki, for the MOSQUITO Beta V2 by HYBRID ARMORY. This will fit on your M-LOK Handguard, and most airsoft guns on the market, without…
Passend für das 16mm CW Gewinde für die Rückseite vom Begadi Supersonic 9/45 Modular Airsoft Silencer. Ich brauchte den Adapter, um den Silencer an ein Standard 14mm CCW Gewinde zu befestigen. 100% Infill PETG 0,10 oder 0,15 Schichthöhe…
A blank for design fitting. Original prop curvature was sourced from: https://grabcad.com/library/emax-avan-flow-props-1
Attach a chronograph straight to your RIFAttach a chronograph straight to your RIF printed at 0.2 height, 4 walls, 15% infill
Little part to fit an aerosol can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While an average aerosol can…
Flashhider for Airsoft m4 14mm Negative (ccw) 14x1 Linksgewinde
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
I wanted a barrel adapter for my Umarex MP5SD so I made this. Bayonet fitting to 14 CCW. (Also compatible with some JG MP5SDs) A 0.4mm nozzle works fine for the threads.
adaptador para AEG ares saindo de cw para ccw
Update 01.02.2020: bean protector grill and cleaning basket were updated for easier use and more washing volume. Cheap cure wash (CCW) module V1.0: As a SLA printer operator, you quickly figured how annoying and messy post processing of…
Dieser Adapter ermöglicht es UNF Schalldämpfer und Mündungen an 14mm CCW Gewinden zu befestigen
3D model description Barrel Extension with 8.5cm / 3.35 in, has a 14mm CCW Dimensions: - Length: 85MM - Widest Diameter: 20mm 3D printing settings My advice so you can get the best quality on this print on Cura 5.3.1 - Layer Height:…
13mm (M) cw to 14.1mm (F) ccw adapter unfortunately there is not standard 13mm thread option in fusion, it is some weird 13.157? mm thread from a pipe thread option, might need to re thread whatever it is being threaded into but i can…
Airsoft outer barrel extension of 25mm M14x0.1 CCW Must be printed with high density infill (80%)
Hippie Daisy Thread Protector / Flash hider. 14mm ccw / counter-clockwise / left handed threading for most airsoft barrels. Without supports: Print hippie_daisy in white Print hippie_daisy_top in yellow for the ring on top, which you can…
As-close-as-possible-according-to-pictures-found-on-the-internet™ replica of the long and short 'Blue Can' suppressor training tube for 14x1.0mm CCW airsoft threads, two seperate pieces - a base and a body (the tube) and they just push…
12.1mm (M) cw to 14.1mm (F) ccw adapter print 14mm side down made by me in fusion sometimes the threads get stringy but it works
thread 11mm side im making like m8 nut for wench 11mm only long 10mm step file include UPDATE Added v2
This concealment feature allows the user to offset a claw on the PHLster Enigma by one hole. It works by having three holes and one mounting position: The top hole is only for screwing a screw into your holster. This is partially…
16.1mm (M) cw to 14.1mm (M) ccw thread adapter made by me in fusion
Makes it easier to mount the chrono to front barrel. Can use original screws from the PCB that's screwed to aluminum housing. Made it for a friend with this chrono so I'm sharing here.
14.1mm (M) ccw to 14.1mm (F) cw print female side down made by me in fusion may come out with stringy threads but still works
11.5 to 14.1mm ccw (M) thread adapter print 14.1mm side down made by me in fusion may print stringy, still works, might need to re tap or force thread
Potentiometer (cap) for guitar etc.
5mm CCW wheel where the gap for the glass is reduced from about 3.5mm, to 3mm for thinner glass.
FOR AIRSOFT USE ONLY INTRODUCTION Named after Proxima Centauri (Closest star from the sun) due to its slightly futuristic design. This model was made due to the fact that there is only a small amount of loudeners that actually looks good…
*****NOT FOR REAL FIREARM USE***** M14x1 CCW Airsoft Muzzle Brakes. M14x1 CCW threading Stubby brake is 28MMx28MMx43MM Bullet brake is 22MMx22MMx65MM Printed in PETG with .20 layer height, two walls, 15% infill, painted fuzzy skin. V1.1…
A smallER version of a silencer built for my AAP01
A simple thread adapter designed for the WELL MB-03 stock outer barrel . It converts the MB-03 barrel thread to the common 14mm CCW (M14×1 LH) standard, allowing the use of most airsoft suppressors, tracer units, and muzzle devices.…
no longer work with real one' tested with petg glossy af need lil print look better infill part no wall/buttom/top gyroid infill
This is a toroidal propeller for underwater (well that's all I've tested it with anyways) I originally used it on an ROV and with some small brushed motors they produced a good amount of thrust. I just printed them at 15% infill with…
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
12.1mm (M) cw to 14.1mm (F) ccw adapter print 14mm side down made by me in fusion sometimes the threads get stringy but it works
13mm (M) cw to 14.1mm (F) ccw adapter unfortunately there is not standard 13mm thread option in fusion, it is some weird 13.157? mm thread from a pipe thread option, might need to re thread whatever it is being threaded into but i can…
16.1mm (M) cw to 14.1mm (M) ccw thread adapter made by me in fusion
11.5 to 14.1mm ccw (M) thread adapter print 14.1mm side down made by me in fusion may print stringy, still works, might need to re tap or force thread
14.1mm (M) ccw to 14.1mm (F) cw print female side down made by me in fusion may come out with stringy threads but still works
3D model description Barrel Extension with 8.5cm / 3.35 in, has a 14mm CCW Dimensions: - Length: 85MM - Widest Diameter: 20mm 3D printing settings My advice so you can get the best quality on this print on Cura 5.3.1 - Layer Height:…
3D model description This is just a simple little thread adapter for the DINORODUCTIONS Silencers, it is 14mm CCW to 24mm CW Dimensions: - Length: 15mm - Widest Diameter: 24mm !THIS IS FOR AIRSOFT OR MILSIM ONLY! (U CAN USE IT FOR…
I made this do then I can dominate the field with a lousy gun. The shots sound scary while shooting and it works. This is a 14mm ccw threaded amplifier designed for only 14mm ccw threads. This works and is perfect. Print this as 101% (one…
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
A 14x1mm CCW threaded adapter for the H8R. Folks have made a lot of these over the years. We all seem to run in to the same problem - There's a very narrow space between the interior of the h8r where the muzzle piece rests, the outer…
Makes it easier to mount the chrono to front barrel. Can use original screws from the PCB that's screwed to aluminum housing. Made it for a friend with this chrono so I'm sharing here.
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
I made this do then I can dominate the field with a lousy gun. The shots sound scary while shooting and it works. This is a 14mm ccw threaded amplifier designed for only 14mm ccw threads. This works and is perfect. Print this as 101% (one…
A 14x1mm CCW threaded adapter for the H8R. Folks have made a lot of these over the years. We all seem to run in to the same problem - There's a very narrow space between the interior of the h8r where the muzzle piece rests, the outer…
Print slow and with supports, high infill/multiple perimeters for strength.
