453 models
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
About I needed to find a way of tightening nuts on various pieces of electronics hardware (audio jack sockets, knobs, switches, etc) and normal metal sockets were too short, scratched front panels and enclosures, and were difficult to…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
Socket holder designed for craftsman 1/4" Drive set. Sizes included are 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm. Printed in PLA. If this design was helpful, please consider liking the design on Thingiverse! Check out my other…
Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…
This is a Bong/Waterpipe Bowl Holder & Herb Dish - 14mm as the title states. You can put your tobacco, herb, etc in the dish, stand up your bowl, and fill it without spilling anything! 1 version is tapered, the other isn't. This was…
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel.…
this flash hider design is from the designer Hotsauce, that is made for the FGC-9 MKII Stingray edition. that is modded so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.
A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. print settings: 0.2 layer hight should be fine. you can use the 8 layer walls and a 40% infill. but personally I…
I designed this to get my Caddx Nebula Nano into an ImpulseRC Apex 5" Frame. But it should fit into every frame with a mount distance of 20mm. I left 0.3mm of space to make it fit better. It is 19.7mm wide on the outside and there are…
Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…
Similar to EKWB modulus tool, 14mm version. For bending PETG and acrylic tubing for water cooling PCs. Print out of ASA or something even more temp resistant.
print with brim for better adhesion
14mm to 19mm adapter for FPV cameras, works for any standard Nano fpv camera. No need for any sort of supports or a brim. Tested on my runcam split 3 nano, had some crashes and shows no signs of wear. Included v2 : Is a little beefier…
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
The original model didn't fit properly on my rack so I tweaked it. I made the overlap between the frame and the bar parametric so you can easily adapt the part to your needs. The fusion parameter is called “RACK_OVERLAP_WITH_BAR” Have fun…
Source File available https://cad.onshape.com/documents/020fa78cdb4bd31437287ea9/v/11a678e5a4a28bbc66dad17e/e/6afdce6ade2869a5bee4ac25?configuration=List_byYdtnejsYAES6%3DMX&renderMode=0&uiState=69188d63bcdba092b7d63574
I got the idea from Novritsch Modular Suppressor V2. Made it to fit in the holster with a pistol. This is 10cm long and it's threaded in 14mm CCW. Holes for M3 bolt and nut to tighten it well in place. This is for looks only! I printed…
last update 24.02..2025 Hello and welcome to the second iteration of my modular silencer with different skins. If you like you can tip me via paypal: https://paypal.me/crazYm1nd ---------- description This is a complete refactoring of the…
Gridfinity-compatible M3 Bolt Sorter Top - Including 14mm remix. Now fits the Amazing Gridfinity M3 Bolt Sorter
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
I really like the original design by Fabio Ornellas but, my laptop is 17mm thick on the bottom which obviously wouldn't fit in the 11mm opening. I opened up that gap to 18mm and shortened the overall depth so it had a smaller footprint
A few sample holders are found on here and other websites but nothing that allowed bottles with a diameter of 14mm. I decided to take inspiration from the designs but make it from scratch so I can later adjust it for different bottle…
Print with the out side face of the wheel down with support for the outer tire lip and center face only. Wheel face grove doesn't need support. 15% infill is plenty with 3 or 2 wall loops.
Disclaimer: This mod requiring you to remove the cover of your AC power supply and you will need to deal with AC power wiring. If you don't know what you're doing I strongly advise to get help from experienced electrician. Risk of fire…
This is a remake of the pipe bending tool from EKWB.
I have been dreaming about a nice and stable shoulder rig for quite some time now. I've finally decided to make one myself, in 3D and sharing the design and adding new features as time pass. I really like gadgets... and i want to add…
Einfacher und schnell druckbarer Adapter von UNF auf 14mm CCW
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
Updated with better modelled threads and nicer knurling. Now works better with FDM. This a printable adapter for the G&G UMG airsoft replica. It exist because the name brand metal ones cost $50 shipped and that is unrealistic for me, so I…
Found a pretty good A2 birdcage flash hider on Thingiverse, but it doesn't actually seem to have the correct threading, so I edited it and added the 14mm CCW (M14x1 LH) threading that's on most airsoft replicas you would want to put an A2…
4 to 14 mm holder. printed on .3 10% infill. Made for husky long sockets but may work on others. Dimensions shown in attached photo. Template used for gridfinity base.…
Great for holding the seahorse pro and 4 other devices / accessories.
Another take on the Loudener design from the Simpsons. Print upside down without supports. Scale if the threads are too loose or tight. The design is based on the tractrix profile to better direct and amplify the pew pew sounds. The…
The Proline Wheel Adapter is designed to fit wheels with a 14mm hex and a 6x30 bolt pattern. Print in Petg or ABS. Please leave feed back for model and i can update
Make super cheap indoor fpv gates and towers from 14mm PVC pipes. You can buy this type of pipes at a local hardware store or online very cheap. 1 type of part for both gates and towers. Good layer adhesion necessary, you may want to…
I had a lot of 14mm heatsinks laying around, so I changed the NoIR Model to fit those. And because I wanted a blank front, I removed the lettering. You need 4x M3x10 screws to put together the front and the back. Thanks to @Paul_GD for…
Can be used with any 14mm RC cameras. Print with soft TPU. I recommend to print two or three at once (even if you need only one piece), because of possible insufficient cooling and fast print time Tested on: Caddx Ratel 2 Caddx Ratel Pro…
Remixed the barrel to have a 14mm counter-clockwise thread for muzzle attachments.
To plug the holes of the door frame
Simple and quick print to use the NIIMBOT labels for key organization. Designed it specifically for the Transparent 14mm x 30mm labels but can work with anything smaller.
*LED-Strip 14mm X 7mm *Screw to use 3mm I made this because I need to hang them in my attic. And there is no other "nice" way to hang these. So I designed the clips myself. They fit perfectly and hold the strip really firm. Printed in ASA…
Remix of another project to give the Tapered holder in the center more structural support.
Dedicated parking spot for one standard 14mm bowl. Seven variations! For use with LEGAL herbs only. Respect your local laws! To anyone reading this- I give you full permission to print and sell this model for profit. Become a manufacturer…
Attach a chronograph straight to your RIFAttach a chronograph straight to your RIF printed at 0.2 height, 4 walls, 15% infill
Little part to fit an aerosol can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While an average aerosol can…
Simple adapter 14mm garden hose adapter to G1/2"
Capture mesmerizing celestial beauty with our Ø114mm Bahtinov Mask. Achieve precise focus on stars and planets for breathtaking astrophotography. Elevate your stargazing experience by ensuring perfect clarity. Upgrade your telescope setup…
Swedoor cover cap for door frame for Ø14 mm hole Print using PETG and 0.4 Nozzle Hole dimensions Ø14 mm Filament used Prusament PETG Signal White Print settings Nozzle size 0.4 Layer height 0.20 Textured Powder-coated Steel Sheet Support…
Based around a 2020 aluminum extrusion, The bolt in pieces are placed, to precisely bend in a perfect 90 degree axis. This is a concept that works, but you might have to mirror some parts, in order to bend the tube in the particular…
Dieser Adapter ermöglicht es UNF Schalldämpfer und Mündungen an 14mm CCW Gewinden zu befestigen
0.2MM Layer height.No Supports
For 14x14 cameras to fit in Five 33's Tiny Trainer HD's canopy shell.
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! ImpulseRC Apex Micro 14mm Camholder Protects your 14mm cam very well No Props in…
This 3D printed adapter allows you to connect your Arizer Max Air vaporizer (and other Arizer models with the Stem system) to a PET bottle for a smooth water filtration experience. It uses the PCO28-1810 PET bottle cap thread , which fits…
Remix of my 14mm Bowl Holder, now with a raised edge to help you pack your herbs into the bowl.
Hippie Daisy Thread Protector / Flash hider. 14mm ccw / counter-clockwise / left handed threading for most airsoft barrels. Without supports: Print hippie_daisy in white Print hippie_daisy_top in yellow for the ring on top, which you can…
As-close-as-possible-according-to-pictures-found-on-the-internet™ replica of the long and short 'Blue Can' suppressor training tube for 14x1.0mm CCW airsoft threads, two seperate pieces - a base and a body (the tube) and they just push…
I recommend printing the model upside down with a border for better adhesion and without using supports. Diameters nozzle 2mm, 4mm, 6mm, 8mm, 10mm, 12mm and 14mm.
Affiliate Links: Dichtungsringe für 3/4" und 1/2" Anschluss: https://amzn.to/46X57bK Dichtungsringe für 1" Anschluss: https://amzn.to/46X57bK Loctite 55 Gewindedichtfaden: https://amzn.to/48onrgr Filament Schwarz: https://amzn.to/3KQRDqB…
Trommel Perle-Stopper H14mm d4,2mm Kordelstopper geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Bis max. 4,2mm Kordel / Schnurstärke. Viel Spas P.S. Dies gibt es auch nochmal mit 28mm Höhe für 6mm Schnur unter:…
Affiliate Links: Dichtungsringe für 3/4" und 1/2" Anschluss: https://amzn.to/46X57bK Dichtungsringe für 1" Anschluss: https://amzn.to/46X57bK Loctite 55 Gewindedichtfaden: https://amzn.to/48onrgr Filament Schwarz: https://amzn.to/3KQRDqB…
Three bars grouped together for R2-D2's Data Panel. These are designed up using Kingbright publicly available info, for the purpose of project design. I've put a recess of 1mm deep to allow for the diffused screens to be fitted. You will…
Affiliate Links: Dichtungsringe für 3/4" und 1/2" Anschluss. https://amzn.to/46X57bK Dichtungsringe für 1" Anschluss. https://amzn.to/46X57bK Loctite 55 Gewindedichtfaden. https://amzn.to/48onrgr Filament Schwarz https://amzn.to/3KQRDqB…
Affiliate Links: Dichtungsringe für 3/4" und 1/2" Anschluss: https://amzn.to/46X57bK Dichtungsringe für 1" Anschluss: https://amzn.to/46X57bK Loctite 55 Gewindedichtfaden: https://amzn.to/48onrgr Filament Schwarz: https://amzn.to/3KQRDqB…
Print in TPU . The camera cutout is 13.8mm in diameter and about 4.5mm deep. Fits Caddx Nebula Pro, and other cameras that use 14mm lens. The glass portion is made from an microscope slide. You can buy those pretty cheap, they usually…
This is a little holster for 1/4 inch female-to-female TS/TRS adapters of 14mm diameter. I typically see these from Hosa but there are tons of brands that sell basically the same thing. You can slot the adapter into the print. It should…
Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití
Travel Telescope Discord server Hardware kits available for purchase Introducing the Travel Telescope 3.0, a completely redesigned iteration of the Travel Telescope. It’s the perfect companion for your next dark-sky adventure and can…
This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…
Update (04/05/26) - fixxed eyetube on very short version to have the thumb screw m4 insert hole in the correct place. Update (01/05/26) - Added new very short version for the Travel Telescope V3.0 only (due to the mounting points being to…
This is a Multiboard hanger for Ryobi battery chargers that have holes spaced 114mm apart. You will need small thread T-Bolts to attach to Multiboard. 2/1/2025 - Uploaded Version 2. Has longer pegs so that it fits snug, but not too snug…
M5 Bushing – 3D Printable (9mm Tall) Inner Diameter: 5.2mm (Fits M5) Outer Diameter: 10mm (5mm high) Flange Diameter: 14mm (4mm high) Total Height: 9mm 🔧 Print in a material suited to your use case , such as PETG or ABS for durability ,…
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
Hi. I've designed a vent cover for GetFort rack. I'm using this rack as an enclosure for my printer. This vent cover design is meant to protect inside from dust and trap heat in. The vent lid is positioned on top of a base using a single…
Trommel Perle-Stopper H14mm d4,2mm Kordelstopper geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Bis max. 4,2mm Kordel / Schnurstärke. Viel Spas P.S. Dies gibt es auch nochmal mit 28mm Höhe für 6mm Schnur unter:…
13mm (M) cw to 14.1mm (F) ccw adapter unfortunately there is not standard 13mm thread option in fusion, it is some weird 13.157? mm thread from a pipe thread option, might need to re thread whatever it is being threaded into but i can…
Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití
A protective box to carry a spark plug as spare part with you. Two sizes (10 or 14mm thread) available. Features: Embossed text 'Spark Plug' around the box Grooved handle on the closure part Add text with prusa slicer to the top of the…
Dedicated parking spot for one standard 14mm bowl. Seven variations! For use with LEGAL herbs only. Respect your local laws! To anyone reading this- I give you full permission to print and sell this model for profit. Become a manufacturer…
3D model description Barrel Extension with 8.5cm / 3.35 in, has a 14mm CCW Dimensions: - Length: 85MM - Widest Diameter: 20mm 3D printing settings My advice so you can get the best quality on this print on Cura 5.3.1 - Layer Height:…
3D model description This is just a simple little thread adapter for the DINORODUCTIONS Silencers, it is 14mm CCW to 24mm CW Dimensions: - Length: 15mm - Widest Diameter: 24mm !THIS IS FOR AIRSOFT OR MILSIM ONLY! (U CAN USE IT FOR…
Just a circular saw edge guide. I made it as long as I could. So, cut it to fit your printer. It'll fit any 350mm² bed.
A basic J shaped hook meant to be placed or slipped over top of a rail, cabinet door, or shelf wall. Great to hang items such as hats, keys, coats, etc. Five different models with gap widths to fit over wall thickness from 12mm to 16mm.…
I made this do then I can dominate the field with a lousy gun. The shots sound scary while shooting and it works. This is a 14mm ccw threaded amplifier designed for only 14mm ccw threads. This works and is perfect. Print this as 101% (one…
A very small and simple 1g stand for label printer pictures as shown. Will fit standard 14mm width tape (pictures shown are 14x60mm). 'We have Polaroid at home' kind of thing
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
14mm Fuel Injector Caps - needed like 100 of these so 2mins in fusion and bingo bongo, Enjoy :) Chris, NCC
I needed a ziptie cable tag suitable for 30x14mm labels which are used in Fichero / Aiyin Label printers, which you can get for cheap here in Europe in stores like Action. Didnt find one so i made it myself, to label all the ethernet…
Voici un support GRIDFINITIRY pour objectif SIGMA 14mm F/1.4 Art. celui si se compose de 3 pieces: - Grande plate : support du grand coté de l'objectif - Plate du millieu : petit plaque facultative mais permet de cacher la grille - Petite…
Toto je špeciálna TPU vložka/vystreďovač pre 14mm hlboký gola orech, navrhnutá pre bezpečnú manipuláciu so zapaľovacími sviečkami. Problém pri moderných motoroch (napríklad Dacia Sandero Stepway alebo iné motory Renault TCe/SCe ) je, že…
I removed the case and verified that it is compatible with the Rakuten Hand 5G and Galaxy S23 Ultra. I tried printing with the following settings. ------------------------------ Slicer: Creality Print Nozzle: 0.4mm Layer Height: 0.15mm…
I made these designs to bend my hard pipes for my pc water cooling, they are 90° and from a R14 to R20 to R30 ( to make a more gentle curve) I made mine from petg and they survived the whole pc building.
Remixed the barrel to have a 14mm counter-clockwise thread for muzzle attachments.
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
Adapter to use a Dynavap model M with a 14mm water bong. Print with a semi hard TPU to allow the vape to snap into the adapter and form a decent seal. The hole in the adapter can be aligned with the carb to function as a normal, or rotate…
Made a remix so I do not have to use tools to press fit and break one-way bearing. HF081412 One-Way Bearing
![Kingbright x3 Light bars [7.5x14mm] style R2-D2](https://media.printables.com/media/prints/143315/images/1357323_62e78131-795b-463e-921f-2c728f86e12f/large_display_kingbright_group_143315.png)
