1 / 7
Deodorant Can Prop Silencer Adaptor - 14mm CCW / 1/2-20 UNF thread — image 1
1 / 7

Deodorant Can Prop Silencer Adaptor - 14mm CCW / 1/2-20 UNF thread

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Little part to fit an aerosol can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH…

Rating
0 / 5
Likes
3
Downloads
44
Makes
0
Views
621
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution

Little part to fit an aerosol can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included.

This is to make a prop. While an average aerosol can has a reasonable volume of air, and while there probably would be an impact on the noise level, it wouldn't really function as a very useful sound moderating device compared to any other design and should not be treated as such. Obviously do not attempt to use a can if it is not empty, that would be dangerous.

I measure the ring of my aerosol can to be approximately 33.6mm diameter. If your can is also this size, it'll probably work. I couldn't figure out if there is a standard size that is used, but hopefully this works for you.

It was originally designed for a friend for some photography, it definitely looks the part. If you wanted to play airsoft with a fake silencer to look like an assassin, it would certainly be unique.

Remove the top of an empty can, perhaps by prying it off. Push the open end onto the bottle (may require some force) and screw the other to the threaded tube.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.12mm

Infill:

30%

Filament: eSun PLA+ White


Notes:

Print on the flat side. Resolution needs to be low to print threads well.

Category: Props

Tags