1 / 1
Arizer Max Air PET Bottle Bong Adapter (14mm Joint) — image 1

Arizer Max Air PET Bottle Bong Adapter (14mm Joint)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter for Arizer Max Air to use PET bottles as bong with 14mm joint and optional bypass.

Rating
0 / 5
Likes
8
Downloads
28
Makes
0
Views
358
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This 3D printed adapter allows you to connect your Arizer Max Air vaporizer (and other Arizer models with the Stem system) to a PET bottle for a smooth water filtration experience. It uses the PCO28-1810 PET bottle cap thread, which fits all common PET bottles.

There are two versions available:

  • Without bypass: You need to remove the Arizer from the adapter to inhale.

  • With bypass: Simply cover the bypass hole while pulling the bottle out of the water– no need to detach the device.

Recommended setup:

  • Use a PET bottle as the main chamber.

  • Place the bottle in a water container (a measuring jug works best) for stability.

  • Set your Arizer to 220°C for optimal performance.

Printing tips:

  • Print with PETG, ABS or TPU

  • Ensure the threads are clean for a tight fit.

Assembly:

  1. Screw the adapter onto a PET bottle.

  2. Insert the Arizer into the 14mm joint.

  3. Place the bottle in a water-filled jug and slowly pull it out.

  4. Enjoy smooth, water-cooled vapor!

Tags