Counting matching models…
With this nice clip-on dosing funnel, your can load up your chamber of your Arizer glass stem without spilling something. 13.06.2025 Update : added various sizes for the Funnel added Tamper added new Base new feature unlocked “storing Mode”
You need 8 Magnets with Dia 4x3mm for the Cap, ensure you place it in the right direction. For the Cap you need to do a quick color change over the first 0.6mm You can use all straight glass stems from 70mm up to 110mm including the…
After stumbling across something called JarHeadz on Reddit, I thought — hey! I've already made that! I didn't know if people would want a similar model. I've been using the Arizer Solo II model with the SpaceJam for about a year now - and…
I struggled to find a stand that made it easy to charge or store my Arizer Solo II on my desk. The stand has two positions: storage and charging. The storage position stands straight up, while the angled position allows easy plugging in…
The button on my Solo 2 vaporizer broke and I didn't want to spend $170 for a new one because of a few cents worth of plastic. It took me longer than I care to say to realize how the device is assembled, but once I did the design itself…
A handy funnel to help load Arizer ExtremeQ dry herb vaporizers or other bowls.
Increased funnel width to ~60mm Added neck to stand for added support/stability
A quick model that I made for storing all the parts that I personally use regularly with herb vaping. This stores the bowls and the various stems for using the provided bags. It also stores the little stirring pick and the remote control.…
The included STL files are some accessories for an AmScope microscope; 1) replacement lens caps, 2) a replacement LED Ring mounting bracket, and 3) parts for adding a polarizer to the Ring Light. Replacement Lens Caps The Lens Caps STLs…
A simple dock to charge your Arizer Solo II in. The Solo II can be slid into the dock from the front onto the charging plug.
Stand for Arizer Stems with space for small parts I was not happy with the normal print file, so i decided to print this thing in spiral vase mode. You can use the Spiralvase Mode Modell / use the attached .3mf file for print instructions…
Arizer Air Max case I designed this case for safe storage of the Arizer Air Max when not in use. The case contains placeholders for all the parts you would need for a vape session: 1x The Air Max portable micro-heater; 2x The glass aroma…
This is an easy to print cap for Arizer glass balloon mouth pieces. The ones I originally bought all broke and I bought some others from uncle bezos and they broke too. So I decided to make some out of the toughest stuff I can print, 95A…
I was missing a foot on my Arizer Q and decided to make my own. It works as expected.
Handy mouthpiece designed to fit glass connectors with a 3/8ths inch outer radius. Note: Common red brass nozzles contain up to 5% lead and some makers suggest not making products which come into contact with mucus membranes with brass…
A design for a water filter made to filter out microplastics using biologically activated carbon and a plant tissue called xylem. The filtration substrates are a zoomed-in microscopic view of the actual materials. Originally designed for…
Just quick edit at thinkercad to have bigger magnets holes. Strong hold. Can be turned upside down with no problem.
Base to sit tubes and containers upright for Arizer vaperizors
I made this model to protect an Arizer-ecosystem water pipe adapter. It's designed for a 14mm. This is my first fusion-360 based project, so any tips or advice is welcome. Would love a shout out or photo of any finished prints!
This is a kickstand for the airmax bubbler attachment so it does not fall over. I printed it upside down with no issues
I printed this with TPU, works very nice. The “new style” Cap fits in the Arizer Case https://www.printables.com/model/315914-arizer-air-max-case-v4
Polarizer ring for photogrammetry. Plexiglass used was 3mm and the magnets were 5x2 mm. Video of assembly avaliable at https://www.youtube.com/watch?v=c8eMhpucD88&ab_channel=TheDirtyBassett Category: Camera
This 3D printed adapter allows you to connect your Arizer Max Air vaporizer (and other Arizer models with the Stem system) to a PET bottle for a smooth water filtration experience. It uses the PCO28-1810 PET bottle cap thread , which fits…
Für das Scharnier einfach z.B. ein Stück Büroklammer einkleben. Die Löcher sind zum Einkleben von Magneten mit 3mm Durchmesser und 2mm Tiefe. Das ist nicht zwingend notwendig, fühlt sich aber sicherer an, da der Deckel weniger Chancen hat…
I had a pre-filled mouthpiece tip over one too many times and decided to create a holder to keep it from happening. The pattern used to minimize material usage is loosely inspired by sacred geometry.
This is a basic charging dock and storage for the Arizer Solo 3 vaporizer. It allows for you to charge the device and store the mouthpieces in their original cases (or you can print one!), as well as metal tool, Q-tips, and filters. You…
I love my Extreme Q vaporizer for aroma therapy but I found that the form factor was “too big” for me. It easily tips over and takes up a lot of room on my small side table so I completely re-designed it to be shorter and more boxy so…
The Arizer Argo is a fantastic vapouriser but it has 2 weak points. One being the battery latch and the other the latch that holds the top open. If either of these break it can make the device a pain to use. This case will fix either of…
It is using m3 bolts for hinge. The latches will need some cutting down after printing, to help it release easier. It latches very tightly. I used a .4 nozzle with .2 layers. update: this model isn't great, with the latch being a major…
I designed this ringlight for my photogrammetry setup. The ringlight suits 6.7mm diameter camera lenses. Just let me know, if you need a different diameter. You will need 32x3 5mm LEDs, 32x 100Ohm Resistors and a 12V Power supply and a…
This is a work in progress. If we haven't contacted you, please do not print this model. The raspberry pie case is a remix of JayCee09 's model: https://www.printables.com/model/41883-raspberry-pi-4-case
Designed this to replace my glass mouthpiece that keeps breaking from being dropped. Printed in PETG.
I recently got a 67mm Polarizer from K&F Concept, and it looked kinda ugly with all the stepup rings, so i made this quick cover and a toothring thing, that way the step up rings get covered up, while still being able to easyly turn the…
‘Integrated’ storage for your polarizers, filters, etc. Holds 8 pieces… Designed for ME580 scope, may fit others… Attaches to scope using existing threaded holes and a couple M3 x 8mm bolts. Printing: No supports required. Re-orient model…
Quanli Gorilla 6558 Trinocular Microscope flip out Polarizer light. Wanted a solution to mount a Polarizer light on my Microscope.The unique way this scope is setup with the Barlow lens, Thermal Camera, and UV lamp makes mounting any…
Having only a single color printer i cleaned the lid and made a version with the logo on top.
Designed this to replace my glass mouthpiece that keeps breaking from being dropped. Printed in PETG.
I recently got a 67mm Polarizer from K&F Concept, and it looked kinda ugly with all the stepup rings, so i made this quick cover and a toothring thing, that way the step up rings get covered up, while still being able to easyly turn the…
Handy mouthpiece designed to fit glass connectors with a 3/8ths inch outer radius. Note: Common red brass nozzles contain up to 5% lead and some makers suggest not making products which come into contact with mucus membranes with brass…
A handy funnel to help load Arizer ExtremeQ dry herb vaporizers or other bowls.
For tube printing I used PET G and TPU for printing caps. Category: 3D Printing
This is a case for Arizer Argo vaporizers which uses a glass pipe to put your material in. Case can hold 2 glass pipes with press fit. Magnets are 6x4mm ones to have satisfying snap. Hinge is done by using piece of strong fillament as…
This is a case for the Arizer Solo 2 to hold the glass tube with it. This hold with friction so you may need to shrink it a bit. I've only printed it with ASA. To hold and protect the glass pipe, you should use the cap that come with it.
This battery cover is a replacement part for the Arizer Air SE vaporizer.
Created a small tamping tool for the Arizer Solo II to gently pack the dry flower in one press (may work on solo I but I only tested with what I own) Category: Hand Tools
This is a case designed specifically for the Arizer Air 2, and the Arizer Air 1 if they are the same dimensions (I believe they are but haven't checked). It is designed to be air tight and includes a seal to be printed from TPU and…
Having only a single color printer i cleaned the lid and made a version with the logo on top.
This stand holds your device + 2 stems. It has an opening in the back to plug in the usb cable.
2022/11/12 - UPDATE: You can find the updated Version of this Case here: https://www.printables.com/model/315914-arizer-air-max-case-v4 You need 8 Magnets with Dia 4x3mm for the Cap, ensure you place it in the right direction. For the Cap…
Top of my Arizer Q broke during transport. Did not have the top for reference, but measured the device itself for the dimensions. Works as expected for a replacement.
Keep your Arizer 110mm straight tube safe and sound with this capsule. Designed with this in mind: https://arizer.com/air-all-glass-aroma-tube/ I made it half out of necessity, and half to get some more Fusion 360 practice. Would be…
Tube cap for the plastic travel tube of a number of Arizer vaporizers (Air, Solo, Solo 2). Tested on some that came with my Arizer Solo 2. Designed to be printed with flexible filament (TPE/TPU), example pics are with eSun TPE-83A.…
