1 / 4
Ringlight/Makroflash with Crosspolarizer (optional
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I designed this ringlight for my photogrammetry setup. The ringlight suits 6.7mm diameter camera lenses. Just let me know, if you need a different diameter.
You will need 32x3 5mm LEDs, 32x 100Ohm Resistors and a 12V Power supply and a couple of wires
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu
Can be printed without support/raft
Category: Other