Search results: ringlight

Counting matching models…

Autodart full Setup with ringlight

A full setup to print for Autodarts. in this File there are the cameramounts an the ringlight. the 2 versions is when you play with a silencer

Downloads: 447
Likes: 18
Rating: 0

Order a print of this model

Printables

Roof Ceiling Softbox & Ringlight 5/8 Baby Pin Hanging Mount by Tactical Tech 3D

Overview One-piece 3D-printed ceiling mount for overhead studio lighting. 38×138mm base with four countersunk holes for #8 wood screws (direct joist attachment). Central 5/8" (15.875 mm) baby pin extends straight downward 90mm for…

Order a print of this model

Printables

Flexible & sturdy arm adapter to microscope, microphone or ringlight

Adapter for the flexible and sturdy arm system to mount universal Led ring lights, Microphones or Microscope boom mounts

Order a print of this model

Printables

Microscope holder for generic microscope/flexiarm/ringlight mounting

Dm9 microscope holder for generic microscope/flexiarm/ringlight mounting

Order a print of this model

Printables

DIY Smart Ringlight | DIY Smart Ring Light |

Hey All! Looking for a DIY Smart Ring Light solution? need more color control? and don't want to pay 100s USD for it? give this model a try and make yourself a DIY Smart RingLight. Pros of the DIY RingLight: SK6812 RGBW LEDs for better…

Order a print of this model

Printables

RingLight

With a student, we designed a simple ringlight to when we have to work from home. In the center there is room for mounting a webcam, and in the bottem there is a thread that fits the cheap articulating arms that are sold on ebay,…

Order a print of this model

Printables

Cable hanger for stringlights

It's just a simple clip, intended to be screwed to an overhead beam, that holds the cables for lantern-style stringlights without subjecting them to significant stresses.

Order a print of this model

Printables

Dart light / ringlight

I used this light: https://www.amazon.de/dp/B0B2WKN4PY?ref=ppx_yo2ov_dt_b_fed_asin_title As a powersource i am using a 20000 mAh powerbank that i attached behind my surround. I didnt make a full ring because its easier to pull out the…

Order a print of this model

Printables

IKEA STÄNKREGN Ringlight Logitech Mevo Hack

A support to mount a cheap IKEA STÄNKREGN ring light on a Logitech MEVO. Print with TPU. Picture figure a V1 printed on FLSUN QQs (about 1+ hour print time)

Order a print of this model

Printables

BambuLab Top Ringlight Glass Riser

I liked this riser , but didn't have any LED strips to use. I do, on the other hand have an old blogger ringlight I wasn't using. So I remixed it to increase the height, remove spots for the internal LED strips, and added a hole for a ¼"…

Order a print of this model

Printables

Creative HD Live cam ringlight adapter

I use a Creative HD live Webcam for my buildplate. For a holder I find this on thingiverse: https://www.thingiverse.com/thing:2584681 But I need a holder for a ringlight. I've used a ws2815 Neopixel ring with 12 LEDs (40mm…

Order a print of this model

Printables

Stringlight Generator Openscad

Genarate beautiful christmas ornaments for a LED string light! Source code by veryos, very open source.

Order a print of this model

Printables

Roof Ceiling Softbox & Ringlight 5/8 Baby Pin Hanging Mount by Tactical Tech 3D

Order a print of this model

Printables

Ringlight for Darts

I designed a ring light for playing darts. You will need some glue, 8 magnets with a diameter of 8 mm and a thickness of 3 mm, and a 2 m long LED strip. You can operate it with 12 or 5 V. First glue the parts together and then reinforce…

Order a print of this model

Printables

Flexible & sturdy arm adapter to microscope, microphone or ringlight

Adapter for the flexible and sturdy arm system to mount universal Led ring lights, Microphones or Microscope boom mounts

Order a print of this model

Printables

Microscope holder for generic microscope/flexiarm/ringlight mounting

Dm9 microscope holder for generic microscope/flexiarm/ringlight mounting

Order a print of this model

Printables

Sony RX100 V7 Ringlight Adapter

Teileliste Small Rig Sony RX100 VII & VI Camera Cage | Wooden Grip | SmallRig Photo Schrauben – alle Bohrungen mit Gewinde sind „imperial“ 1/4"-Normschrauben - fotoschraubenshop zB 1/4“- Zylinderkopfschraube, Edelstahl – 13mm…

Order a print of this model

Printables

Ringlight V2

New version of the ring light . This is larger. 280mm in diameter and needs a printer with at least 280mm in X and Y. Use PETG that can withstand more heat. Glue aluminium foil to the reflector for maximum reflection. The reflector can…

Order a print of this model

Printables

Ringlight mount for monitor

Its a good mount to put you ringlight on your monitor, so you don't have to occupy your table with the tripod.

Order a print of this model

Printables

10" Ringlight board clamp

A clamp designed for a 10" ringlight and 25 mm thick boards. Hardware is requireed 2x: M3x12 + Nuts I recommend ASA because its stiff and does not bend over time. PLA will be fine as well. Print with 4 walls and 0,2 LH I recomment to…

Order a print of this model

Printables

Ringlight mount for the Revopoint Handheld Stabilizer (POP and MINI Series)

For scanning Human heads I needed a even source of light. I have not had satisfactory results with fixed lighting as I need to be able to move around my model and then inevitably block some of the lights. On an intuition I used my cell…

Order a print of this model

Printables

Openscan Mini - Arducam - Ringlight -Adapter

Adapter for the 16MP IMX519 Arducam and the pre soldered ringlight to properly mount them on the openscan mini scanner. During assembly of the scanner I had problems mounting and aligning the camera and the ringlight properly because…

Order a print of this model

Printables

Reversed Pentax K-mount to Neewer macro ringlight adapter

Adapter to attach a reversed Pentax K-mount lens to a Neewer macro led ring light. Like the lens cap this is remixed from, the k-mount tolerances are fairly tight, so some manual cleanup may be required to allow this to install smoothly.…

Order a print of this model

Printables

Pentax K-mount aperture latch for ringlight adapter

A tiny, slightly adjustable (3-position) f-stop lock for use with this reverse-mount ring light adapter . Place the V of this part over the lens' aperture slider, then slide one of the three notches over the vertical stop for the…

Order a print of this model

Printables

SUPPORT TELEPHONE RINGLIGHT

Bonjour, J'ai créé ce fichier afin de remplacer la pince de la ring light Action ou amazon Créé pour iPhone 14 Pro avec coque, compatible iPhone X, et plein d'autres ! Largeur Maximale 76.5mm Profondeur Maximale 12.5mm N'hésitez pas a…

Order a print of this model

Printables

Neopixel ringlight with cold shoe mount

This is a bit of a tweak to the Adafruit Neopixel ringlight project that can be found at https://learn.adafruit.com/3d-printed-camera-led-ring/overview I liked the idea but I wanted to change the way the light mounted on the camera. I…

Order a print of this model

Printables

remix SUPPORT TELEPHONE RINGLIGHT avec accroche

Merci à Jim3DMaker pour son fichier, voici le remix pour l'iphone 13 pro max avec une protection silicone. inclus aussi le support d'accroche car la tige du ringlight d'electrodepot est trop longue.

Order a print of this model

Printables

PC monitor top bracket for webcam ringlight or similar cables

For work I do a lot of Teams and webEx calls so I have a clamp-held ring light with an inline adjustment and on/off switch in the usb cable, and a webcam. The webcam has a usb cable that is marginally thicker than the cable for the ring…

Order a print of this model

Printables

Remix for 2023 Action LED Ringlight

This is a remix of the remix to mount a LED Ringlight bought from an Action market (a german supermarket brand).

Order a print of this model

Printables

RingLight 170mm

RingLight with diameter of 170mm for a 12mm wide WS2812B LED-strip (144LED/m, in this configuration 50cm/72LED) controlled by a Arduino Nano. Be aware that different manufacturers of LED-strips use different sizes of LEDs and width of…

Order a print of this model

Printables

Ringlight/Makroflash with Crosspolarizer (optional

I designed this ringlight for my photogrammetry setup. The ringlight suits 6.7mm diameter camera lenses. Just let me know, if you need a different diameter. You will need 32x3 5mm LEDs, 32x 100Ohm Resistors and a 12V Power supply and a…

Order a print of this model

Printables

Creality Ferret Pro ringlight mount

I used this 10" ringlight from Amazon: https://www.amazon.de/dp/B07Q3471S2?psc=1&ref=ppx_yo2ov_dt_b_product_details With the riglight you will also get an adapter. Disassemble the adapter and use the screw and the nut for this mount. You…

Order a print of this model

Printables

A_RingLight

Habe das Modell erstellt um das visuelle Beurteilen von Probeflaschen im Labor zu erleichtern. Es passen 500mL Flaschen mit bis zu 7cm Durchmesser hinein. Um 1L Schott Duran Flaschen zu beleuchten kann das Modell auf die Rückseite gedreht…

Order a print of this model

Printables

Better phone mount for a cheap ringlight

Better phone mount for a cheap ringlight. Original one on these is flimsy and almost unusable. Sturdy adjustable mount with thumbscrews is just what makes a cheap ringlight 400% more usable. Hardware needed: 2 pcs M5 x 30 Hex head screws…

Order a print of this model

Printables

GoPro ringlight baseplate

This plate can be used to fit a cheap 12V LED-ring (I bought 2 on eBay for under 3€ - 50mm outer diameter, 41mm inner diameter - they are sold for cars) to a GoPro Hero 3+ Category: Camera

Order a print of this model

Printables

Logitech c270 Ringlight Mount - NeoPixel

This piece replaces the cover of the logitech c270 webcam. It adds the possibility to mount a LED ringlight to it to. This can be helpfull if the printer is located in a dark enclosure or room, but prints should still be monitored. Part…

Order a print of this model