DIY Smart Ringlight | DIY Smart Ring Light |

Hey All!

Looking for a DIY Smart Ring Light solution? need more color control? and don't want to pay 100s USD for it? give this model a try and make yourself a DIY Smart RingLight.

Pros of the DIY RingLight:

• SK6812 RGBW LEDs for better white color control and RGB for fun!
• ¼-20 inch standard tripod thread.
• LED Light diffuser for unified light diffusion.
• M3 Thread inserts for easy assembly and disassembly of the ring light.
• READY RGBW Ring light PCB! 
• WLED software.

This is a DIY ring light, with a ¼-20 inch thread so you can mount the ring light with any standard tripod or stand.  The top diffuser part diffuses the light and makes everything look uniform. The really cheap LED ring light PCB ( about 11usd) makes the entire assembly of the ring light so easy! only 3 wires need to be solder and that's it! ( VCC GND DATA).

I designed my own LED controller that uses WLED software to control everything, but you can do it yourself with any ESP microcontroller, and just install WLED on it.

Please print everything from PETG or anything better to keep the print from melting under the LED heat, ALSO I printed the Top(diffuser) part out of clear PETG for better diffusing effect.

Print Settings

• Top Part:
• Material: PETG or anything better (ASA,ABS,PC)
• Nozzle Size: 0.4mm
• Layer Height: 0.2mm
• Vertical Walls: 2-3
• Infill: 100%
• Supports: None

• Base Part:
• Material: PETG or anything better (ASA,ABS,PC)
• Nozzle Size: 0.4mm
• Layer Height: 0.2mm
• Vertical Walls: 2-3
• Infill: 15-20%
• Supports: YES

Parts Needed:

• 40 LED Ring PCB RGBWW - Link1  Link2
• ¼-20 Thread Thread Inserts - Link
• M3 Thread Inserts(3) - Link
• M3X10 Screws(3) - Link

Make sure to check the video we made on the Smart Ring Light on our TikTok Channel:     

                                             RingLlightVideo                LEDControllerVideo

If you print one, please share your results with us! and happy printing!