1 / 5
Roof Ceiling Softbox & Ringlight 5/8 Baby Pin Hanging Mount by Tactical Tech 3D — image 1
1 / 5

Roof Ceiling Softbox & Ringlight 5/8 Baby Pin Hanging Mount by Tactical Tech 3D

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One-piece 3D-printed ceiling mount for overhead studio lighting

Rating
0 / 5
Likes
6
Downloads
37
Makes
0
Views
115
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Overview

One-piece 3D-printed ceiling mount for overhead studio lighting. 38×138mm base with four countersunk holes for #8 wood screws (direct joist attachment). Central 5/8" (15.875 mm) baby pin extends straight downward 90mm for zero-torque loading. Ideal for softboxes, ring lights, and LED panels. Fully printable, permanent overhead key/hair light setup.

Recommended Print Settings

  • Filament: PETG (required – resists heat from lights)

  • Layer Height: 0.20–0.30 mm

  • Walls/Perimeters: 5–6

  • Top/Bottom Layers: 8–10

  • Infill: 40–100% gyroid (100% for maximum strength)

  • Orientation: Print sideways (pin flat on bed) – layer lines run along pin length

  • Supports: Tree supports only on base overhang

  • Brim: Optional 5–8 mm

  • Nozzle Temp: 230–245 °C

  • Bed Temp: 75–85 °C

Tags