Ringlight mount for the Revopoint Handheld Stabilizer (POP and MINI Series)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this work in progress mount you can attach a Ringlight to your Handheld Stabilizer for even lighting of your model.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 48
- Makes
- 0
- Views
- 828
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
For scanning Human heads I needed a even source of light. I have not had satisfactory results with fixed lighting as I need to be able to move around my model and then inevitably block some of the lights. On an intuition I used my cell phone as a light source and the result was noticeably better but not perfect. With a ring light the results should be even better - I just need to get it mounted on the scanner.
The STL files are numbered and always the most recent.
Additional it needs a Ball bearing to connect the two pieces and two tripod screws to connect everything. The ball bearing needs an inner diameter of 8 mm and an outer diameter of 22 mm and a height of 7 mm to fit.
It's a work in progress because I want it to have some additions to work perfect, like a lever to move with the Scanner Head.
Note: With warm light you get better results than with blue/cold light.