Ringlight mount for the Revopoint Handheld Stabilizer (POP and MINI Series)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this work in progress mount you can attach a Ringlight to your Handheld Stabilizer for even lighting of your model.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 828
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
For scanning Human heads I needed a even source of light. I have not had satisfactory results with fixed lighting as I need to be able to move around my model and then inevitably block some of the lights. On an intuition I used my cell phone as a light source and the result was noticeably better but not perfect. With a ring light the results should be even better - I just need to get it mounted on the scanner.
The STL files are numbered and always the most recent.
Additional it needs a Ball bearing to connect the two pieces and two tripod screws to connect everything. The ball bearing needs an inner diameter of 8 mm and an outer diameter of 22 mm and a height of 7 mm to fit.
It's a work in progress because I want it to have some additions to work perfect, like a lever to move with the Scanner Head.
Note: With warm light you get better results than with blue/cold light.