Arizer Max Air PET Bottle Bong Adapter (14mm Joint)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Arizer Max Air to use PET bottles as bong with 14mm joint and optional bypass.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D printed adapter allows you to connect your Arizer Max Air vaporizer (and other Arizer models with the Stem system) to a PET bottle for a smooth water filtration experience. It uses the PCO28-1810 PET bottle cap thread, which fits all common PET bottles.
There are two versions available:
Without bypass: You need to remove the Arizer from the adapter to inhale.
With bypass: Simply cover the bypass hole while pulling the bottle out of the water– no need to detach the device.
Recommended setup:
Use a PET bottle as the main chamber.
Place the bottle in a water container (a measuring jug works best) for stability.
Set your Arizer to 220°C for optimal performance.
Printing tips:
Print with PETG, ABS or TPU
Ensure the threads are clean for a tight fit.
Assembly:
Screw the adapter onto a PET bottle.
Insert the Arizer into the 14mm joint.
Place the bottle in a water-filled jug and slowly pull it out.
Enjoy smooth, water-cooled vapor!