Liczymy pasujące modele…
A great Wall Art of Bing Bong from Inside Out (Vice Versa). Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used a children’s coloring
World Piece! This unique piece was made to help bring about world peace. Its glass downstem leads down to an astounding 208 hole percolator that delivers unmatched smoothness. The percolator also features an open bottom which makes it…
That's right, its a homestyle water bong made from a wide mouth mason jar and some love! Plus you get to play with it!!!
A great tactile fidget that can be easily modified and added to just by tweaking print settings and adding shapes and colors. My daughter wanted to make her own fidget so we got to work on Tinker cad. It is designed to be printed on…
Here this unholy abomination lies, I only created this creature as a school project. It was based on the default revolver from ULTRAKILL. The first model is the base blaster, the second is it holding a smaller version of itself. Enjoy…
I love changing the colors to see what it comes out looking like! This is one of my first models. Hope you all like it!
Original design by PhD Poturak Semir: www.Linktr.ee/3esign : Single layer print, make sure you increase the flow, that is amount of plastic in order to get strong enough print. It is fully optimized design which uses least material and…
Adapter to use a Dynavap model M with a 14mm water bong. Print with a semi hard TPU to allow the vape to snap into the adapter and form a decent seal. The hole in the adapter can be aligned with the carb to function as a normal, or rotate…
A remix for a smaller pipe neck diameter that holds only a lighter.
Just sits in the front holder, so it can hold a normal human cup. I use sticky-tac to hold it in.
All you need is a glass bowl & a 32oz Mason Jar Designed with interchangeable mouth pieces for when smoking with others. Make multiple for all your friends!
Pipe with swirly stem. fits 14/20 Standard Taper ground glass bowls. Vortex action reduces / eliminates ash ingestion, as long as you're not pulling it like you're trying to suck start a Harley. You should probably consider them…
You shouldn't smoke. Especially in a 25 year old van. SO, unscrew the ashtray top, replace it with this. I put some foam in the bottom for less clanking. Also I forgot to reinforce the screw holes, but it drilled fine. P1S - ironed tops,…
This is for the Mazda Bongo, but will fit anything M10x1.25 The Mazda has to have a removable boot - this will fit the existing retaining ring if you replace the knob with an 8 ball or whatever :)
A 3D model made in SolidWorks of the meme going round at the moment - the Bongo Cat.
this daisy chain-able bong fits on a gatorade or DARE / milk bottle it is designed to work with standard garden-hose and some tape it also fits standard 16mm grommets for the aluminum stems for the waterpipe but it is very modular you can…
UPDATE=V2 Prints easier and more quickly. Looks slightly better Imo, Improved tolerances. A tilt-based gravity bong. I'm not sure how well it works but in theory it should be fully functional. I will eventually print it and showcase it…
PSU Mount for Bong 69 v2.3 board. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell) (should fit any PSU with 150mm between mounting holes). The design has an in-cut on the bottom to…
Jste nazlobení, když vám vypadávají papírová kolečka v ukazateli kol ve hře Ubongo?! Máme pro vás řešení. Are you annoyed when your paper wheels fall out?! We have a solution for you!
Lapras Vibes : Ever wanted to smoke with your fave Pokémon? Here's your chance with this Lapras bong design, free for you to print at home! Awesome Details : This Lapras looks like it just swam out of your screen, with all the cool…
This fits over the pickups on a Music Man Bongo 5 and gives you something to rest your thumb on AND something to make fingerstyle easier.
Ein Bong-Chillum-Adapter (14,4mm auf 18,8mm) ist ein vielseitiges Zubehör, das die Kompatibilität zwischen Glasstücken mit unterschiedlichen Schliffgrößen ermöglicht. Er dient dazu, einen 14,4mm-Schliff auf einen 18,8mm-Schliff (oder…
These replacement pieces for the Ubongo game are specifically designed for people with hand mobility challenges. They offer an ergonomic grip that is easy to handle, enhancing the gaming experience.
This is a simple 6in bongo drum with a 0.8 mm thick drum surface. Print upside down at 0.2mm layer height with 4 bottom layers to have a solid drum surface. The rest can be printed at whatever infill density desired. Enjoy!
Since the OEM silicone bong adapter is a very loose fit, I designed this alternative which has very tight tolerances. You can use it confidently without worrying about the vaporizer falling to the ground when you hold the bong, there is…
This is a simple 7in bongo drum with a 0.8 mm thick drum surface. Print upside down at 0.2mm layer height with 4 bottom layers to have a solid drum surface. The rest can be printed at whatever infill density desired. Enjoy!
The bongo models are designed to print topside down as one part with no supports needed. Print the 0.8mm top layer solid and the rest can be made at any density. The holes in the connector were designed to fit an M5 machine screw without…
Twist neck bongs are expensive and limited in selection. This stand allows you to use your flat-base bong tilting it at 45 degrees to accumulate more cloud with less water. Should fit most standard sizes. Width: 100mm Depth: 130mm Height:…
Double king for Bongcloud420 (chess variant). Basis diameter: 40,73 mmt The high king, double king or lion king is a fairy chess piece used in Bongcloud420 instead of the king. It can move and capture like a king two times per turn.
Miniature Bongcloud420 set and board. Print it using a fine nozzle setting. You will need to print the next .stl: 16 pawns (8 of each color) 4 queens (1 of each color) 4 chancellors (1 of each color) 4 archbishops (1 of each color) 2 high…
Winter time, cold time. And when you share an herbal cigarette with friends, unfortunately you don't just share the pleasure. My solution is quite simply a matching herbal cigarette tip, which can also be used as a blunt or joint adapter…
A simple holder for a 14mm glass head. Also simplifies the filling of the head.
Print one of everything except the player trays, which needs 4 printing. Originally designed for Tonga Bonga but can also fit Batam. Just place the cards in the coin or hex tray. (note - adjusted these slightly after I took the pics so…
40cm bong, 110mm bottom bowl,80mm top bowl holes to be drilled
A slightly more stylish version of my 14mm-Fill'da'Bong glass head holder Also simplifies the filling of the head.
Rebuild of a film set's favourite accessory, the Bongo Tie. Holds everything together, especially cables. I wanted to buy a large pack of rubber bands in different sizes to have flexability. Therefore, I created four models with different…
I highly recommand to use at least 50% infil, but 70%+ will be much better. They fit well but migh have a bit problem after printing, but after couple of games problem is solved. Printed on Artillery SW X4 PRO
Adaptors to connect your Puffco Pivot to your bong (with a standard 14 mm or 18 mm port). I also added the option between a 65 mm and 50 mm long versions incase your rig needs more clearance. This model is also print in place !
Classic 3D-Printed Bong – 14mm Glass Bowl Compatible This is a simple, functional, and easy-to-print classic-style bong designed to work with any standard 14mm tapered glass bowl. It provides smooth airflow and a familiar shape while…
Remix of another project to give the Tapered holder in the center more structural support.
Hi, We have too many boxes laying around so i needed something to jam two games in one box. This is made for ubongo board game and ubongo junior. All will fit in big ubongo box and prevent mixing of basic shapes (game pieces). I made both…
Fits 14/20 standard taper “glass funnel” bowl. The multiple chambers give a well filtered, fully blended smoke. I consider these disposables and do not attempt to clean them. They last me 2+ weeks of heavy use before needing replacement.…
I really liked the box from @ROLS733, but also wanted a space for the Wolkenkraft Bubbler and Bong adapter.
A simple bongo drum. If hit correctly, it makes a nice resonating boom sound. Recommendations and info: I printed it in PETG, 0% Infill. I printed it a 100% scale, membrane on the print bed. On a whim, I cut it off at 130mm in the slicer,…
Print with the threads on the bed. You may want supports inside of the bottle screw area - doesn't matter though it still works fine if you don't (just a little cleanup to do). Print at 100% infill. I used PETG. A hose washer on top of…
poke ball bong, screw together halves for easier cleaning.
Loved the original and made a few edits. Now unscrews for easier transport! Made the straw longer Edited to use 16.9/500ml bottles Added threads to the down stem and straw as well as adapters on the cap part Printed mostly default…
This is a model created as a small collectible figure of Bing Bong from the movie Inside Out, the main model was created using MakerWorld's Image-to-3D tool. The small base was created and adjusted using Blender. In the files I added the…
any 14mm bowl will slot in the top easily allowing tight connection fit in most average sized plastic drink bottles supports not needed for best performance sand the outside lightly enjoy responsibly <3
A great Wall Art of Bing Bong from Inside Out (Vice Versa). Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used a children’s coloring
The lid for my Bormioli Rocco 387770 Pandora Glas was broken, so I created a new one. I reused the old sealing ring. I printed with Extrudr XPETG.
Edit: Whoops, accidentally uploaded a bad version of the STL - corrected. I made this for my sister in Colorado. She wanted a medium-sized bong but one that would keep the fire as far from her face as possible. So, voila, I present you…
Hey I am really excited to introduce to you my new print: Custom Bongo Ties . I couldn't find any Bongo Ties reseller here in Czech Republic, so I decided to design them on my own. All you need to get for the assembly is a bunch of rubber…
I designed this bracket to display my DK Bongos on the wall. There's room for the cord to be wrapped around out of sight. It clips onto the center of the bongos and allows you to hang them from a screw in the wall. I printed this with a…
50x100mm dry bottle bong, for use with standard 14/20 joint glass funnel bowls. The vanes give a vortex filtering action, and screws smoke down deep . Update 2025-10-05: reduced volume by hollowing out the bottom, helps tames the lung…
World Piece! This unique piece was made to help bring about world peace. Its glass downstem leads down to an astounding 208 hole percolator that delivers unmatched smoothness. The percolator also features an open bottom which makes it…
V2 exclusively available on MakerWorld A fully 3d printed Gravity infuser (Even the O-Ring) that doesn't leak and all you'll need is a 14mm bowl. Video of it working Print list of what you need - 1 Body - 1 Mouthpiece (long or short) - 1…
An insert for the original Ubongo box fitting both the original edition of Ubongo with large cardboard cards and hourglass and Ubongo Junior. I remixed @Noname22cz's original model, since it was made for newer version of Ubongo with…
Made this on a whim when a friend mentioned it would be cool if my Lego Luke Skywalker had a bong to chill out with.
Modified my AVLP water pipe adapter to fit the AVLP2. Depending on your printers precision you might need to play around with the slicer settings to get it to fit right. I printed the model with a Bambu P1S using hard TPU, and it is a…
Approx 80mm^3 disposable hand pipe for use with 14/20 standard taper joint "glass funnel" bowls. Works quite nicely with translucent filaments. I print these in PLA with 0.2mm layer, and no supports. You might also enjoy my other smoking…
Inspired by the excellent Octo Weed Debowler Ashtray, This is a simpler bowl version that I customized to make personalized gifts.
This 3D printed adapter allows you to connect your Arizer Max Air vaporizer (and other Arizer models with the Stem system) to a PET bottle for a smooth water filtration experience. It uses the PCO28-1810 PET bottle cap thread , which fits…
That's right, its a homestyle water bong made from a wide mouth mason jar and some love! Plus you get to play with it!!!
This is a great accessory for when your figurines would like to take the edge off, maybe listen to some albums. While the piece is fully functional, the melting point of PLA is well below that of a lit flame, so I can not recommend using…
To connect the mouthpiece of the Norddampf vaporizer to the bong’s chillum, I used a hose. To connect the chillum to the bong, I used a stopper.
I love the feel of a hookah hose, the water filtering and cooling of a bong and i love my volcano. This design comes apart super easy to clean. I glued my bag adapter into the piece. i want to attach it and 3d print it on, but i like…
A great tactile fidget that can be easily modified and added to just by tweaking print settings and adding shapes and colors. My daughter wanted to make her own fidget so we got to work on Tinker cad. It is designed to be printed on…
A remix of Damien See's DK Bongos mount that is compatible with the IKEA SKÅDIS pegboards.
Here this unholy abomination lies, I only created this creature as a school project. It was based on the default revolver from ULTRAKILL. The first model is the base blaster, the second is it holding a smaller version of itself. Enjoy…
WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE HAAAAAAAAAAAAAAVVEEEEEE FUUUUUUUUUUUUUUUUNNNNNNNNNNNNNN!!!!!!!!!!!!!!!!!!!!!!!!!!
I love changing the colors to see what it comes out looking like! This is one of my first models. Hope you all like it!
Limelight Frolic to bong adapter using the glass piece from the Crafty/Mighty bong adapter. It should also fit various mighty/crafty glass stems. I recommend printing it in ASA or another more heat resistant material. That said, I did all…
i havent had a chance to do an actual print yet to discribe the quality of the model but i will do so as soon as i get a print of it done. 3D model description: Valentines Heart/Dragon Bong. 3mf file 3D printing settings: 100% infill if…
🇰🇷 대한민국 제주도에 오신 것을 환영합니다! 🏔Welcome to Jeju Island, South Korea! - To sell prints of this model for your business, you must subscribe to our Authorized Reseller license. Seongsan Ilchulbong (Korean: 성산일출봉), also called Sunrise Peak, is a…
česká verze dole 🇨🇿 Bongo Cat This project contains everything you need to build a simple interactive Bongo Cat desk toy. You are downloading a practical 3D printable holder designed specifically for an Arduino UNO and a mini breadboard…
I made this for my sister in Colorado. She wanted a medium-sized bong but one that would keep the fire as far from her face as possible. But then she decided she wanted a large one so voila.
Takhle jsem se jednou nudil :D Bong je udělaný na skleněný chillum 16cm dlouhý.
I was inspired when I saw a similar design online but couldn't find an STL anywhere. I have a job interview today and wanted a way to act happily towards the camera while dealing with the anguish of making eye contact with an inanimate…
In emergency, when the glass bongo dies in crashing pain you can use this and an empty cola bottle to still have water filtration for your vaporizer :) The cap used was found here (made by Giorgio):…
BUY SAFETY GLASSES THAT MATCH THE WAVELENGTH OF YOUR LASER. THIS IS A CLASS IV LASER, YOU CAN AND WILL BLIND YOURSELF OTHERWISE. The laser is a 7.5 watt laser module easily found online (ex.…
This is a cap to make a waterfall bong out of a 14mm bowl and a Gatorade (or similar) bottle.
I liked FallenShadow80's Clipper holder ( https://www.thingiverse.com/thing:5194342 ), however I wanted to add a spot for my grinder aswell for easy grab and go hoots. Clip is meant to fit 51mm bong neck and will support a 54mm grinder…
Used to insert an 18mm glass piece in a 11mm ish bong opening
Donald Duck playing a bongo Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
