Water Pipe / Bong from a disposable bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be used for pouring or for applying manual vacuum to draw air through the bottle.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 771
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with the threads on the bed. You may want supports inside of the bottle screw area - doesn't matter though it still works fine if you don't (just a little cleanup to do). Print at 100% infill. I used PETG. A hose washer on top of the bottle threads does wonders.
This is not intended to be put in contact with flame of any sorts. If you do have an application where flame is required, such as converting this nozzle into a bong pipe, insert that separately through the hole at the top of the bottle. Use something like rubber or cork as a gasket to isolate the plastic parts from anything hot.
DO NOT INHALE HOT PLASTIC FUMES - that is bad for you.