Water Pipe / Bong from a disposable bottle
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.80 – €0.98 net (excluding VAT)
For file: water bottle pipe_1_0.4n_0.2mm_PETG_MK4S_50m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.89 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 50.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Can be used for pouring or for applying manual vacuum to draw air through the bottle.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 140
- Makes
- 0
- Views
- 787
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with the threads on the bed. You may want supports inside of the bottle screw area - doesn't matter though it still works fine if you don't (just a little cleanup to do). Print at 100% infill. I used PETG. A hose washer on top of the bottle threads does wonders.
This is not intended to be put in contact with flame of any sorts. If you do have an application where flame is required, such as converting this nozzle into a bong pipe, insert that separately through the hole at the top of the bottle. Use something like rubber or cork as a gasket to isolate the plastic parts from anything hot.
DO NOT INHALE HOT PLASTIC FUMES - that is bad for you.