The Mini Beast Bong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Mini Beast utilizes a G-shaped in-line diffuser with 13 individual slits for maximum water agitation.
- Ocena
- 4,8 / 5
- Polubienia
- 76
- Pobrania
- 1149
- Wydruki
- 5
- Wyświetlenia
- 3224
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Don't let the size fool you; this bong packs a serious punch! The Mini Beast utilizes a G-shaped in-line diffuser with 13 individual slits for maximum water agitation. The Mini Beast also features a corkscrew neck, which serves as both a water stop and as additional agitation to cool the smoke further for a premium smoking experience. The Mini Beast requires NO SUPPORTS and is ready to go straight from the print bed. The opening at the top is designed for a 14mm bowl.
Setting tweaks:
- Make sure you set perimeters at 5 to ensure a good seal to prevent leaking.
- Set solid base layers to 5 (You can always go more).
These settings seem to work well for me; however, you may need additional perimeters/base layers depending on your printer.
I printed this on both a Taz 6 (old school, I know) with a .5mm nozzle and a Prusa XL with a .4mm nozzle--both work fine!