Liczymy pasujące modele…
Version 2, Sun Dec 20 2024 Replacement shell for repair of Storz-Bickel Mighty vaporizer. USE AT YOUR OWN RISK Please watch the temperature, do some research before choosing the right material & use. Please share your experience! Hope you…
A clip so you can hang up your hose after using your storz and bickel Volcano Hybrid Vaporizer. Print upright, 10+% infill. Colour and filament of your choice
Just a simple Funnel for the Yllvape Angus! Should fit snugly around the bowl. Printed in PLA Any feedback is appreciated!
A plain vaporizer holder that allows the charging through the USB port Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0,2mm Infill: no Filament: BQ PLA Category: 3D Printer Accessories
Handy mouthpiece designed to fit glass connectors with a 3/8ths inch outer radius. Note: Common red brass nozzles contain up to 5% lead and some makers suggest not making products which come into contact with mucus membranes with brass…
A handy funnel to help load Arizer ExtremeQ dry herb vaporizers or other bowls.
Turns a pickle jar into a filtering water diffuser for hookah or vaporizers. It attempts to split air bubbles up as much as possible to accomplish better diffusion than many other options I have seen. A gasket printed in TPU will likely…
This is a Zen Vaporizer Capsule Magazine funnel and stuffer. With this tool you can fill all 5 capsules of the magazine at ones. There is also a funnel for a single capsule and a small stuffer tool. Print Option: Bambu Lab PLA 15% Infill…
storage plate with optional cover for vaporizer, grinder, herb capsules and tools a space to place the open herb capsule when filling it up from the grinder is added, as well as a small brim to keep everything clean and tidy suited for…
A quick model that I made for storing all the parts that I personally use regularly with herb vaping. This stores the bowls and the various stems for using the provided bags. It also stores the little stirring pick and the remote control.…
UPDATE 9/12/24: Added improved version with higher walls and accessible USB charging port. Quick model for a friend who was after a stand for their Xmax Ace vaporizer so it could be fixed to a board and used with a waterpipe adapter. I've…
Version 2, Sun Dec 20 2024 Replacement shell for repair of Storz-Bickel Mighty vaporizer. USE AT YOUR OWN RISK Please watch the temperature, do some research before choosing the right material & use. Please share your experience! Hope you…
This is a 3D-printable stand for the Stilus Vaporizer, inspired by the original design. It ensures a secure and stylish placement for your vaporizer, fits all Stilus models (Mini, Pro & Max), and features an inner diameter of 24.4 mm. For…
This is a jar for five capsules of the Wolkenkraft Äris (Ultra) or FX Mini. The capsules are ⌀ 10mm and 12mm in hight. The jar itself measures ⌀ 40mm x 22mm height. You may also like this for the Norddampf Relict .
I was tired of always storing the FX Ultra Mini in the original box, so I quickly constructed a box from https://bento3d.design/ and customized the inlay. The foam inlay from the original box is still used, which slides very smoothly into…
This is a jar for five capsules of the Norddampf Relict. The capsules are ⌀ 11mm and 12.5mm in hight. The jar itself measures ⌀ 51mm x 28mm height. You may also like this for the Wolkenkraft Äris Ultra .
Keep your vapor pens/accessories in one convenient location. Included is a spot for your Slick Ball too. Whoops! Holes are undersized...back to the drawing board! Inspired by http://www.thingiverse.com/thing:118146 Instructions Recommend…
I really liked the box from @ROLS733, but also wanted a space for the Wolkenkraft Bubbler and Bong adapter.
Replacement vaporizer head for NE-C28P, 3D design thanks to Mervin
This plug should fit right into the opening of your Tinymight 2 vaporizer and protect it from dust, lint, dirt and moisture (to some degree). Print it in any material you like: PLA, PETG, TPU should all work. I printed it once in grey PLA…
This is what happens when weirdos get ahold of parametric modeling software. Designed back in 2016 when it was still novel to have cute little pen stands as part of your keys-phone-headphones-wallet-vape desk set. Can be used as a…
A small loading funnel I made for a friend that has physical disability to help him to load material into his vaporizer.
Trichter um die Kräuter optimal in den Topf zu bekommen. Und der dazugehörige Stampfer.
um das Rauchgut im Vaporizer zu verdichten, Funktioniert auch bestimmt für andere Vaporizer
This was made as a replacement for the Flowermate Slick metallic scooping tool that mysteriously vanished into the ether one day. Use the round end for packing, and the scoopy end for scooping. Print it lying down. I used 3 walls and 100%…
To connect the mouthpiece of the Norddampf vaporizer to the bong’s chillum, I used a hose. To connect the chillum to the bong, I used a stopper.
I love the feel of a hookah hose, the water filtering and cooling of a bong and i love my volcano. This design comes apart super easy to clean. I glued my bag adapter into the piece. i want to attach it and 3d print it on, but i like…
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
Have Fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
Have fun! UPDATE: Added version 3. Would recommend to print this version. Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
A replacement mouthpiece for the Plenty Vaporizer. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: Replacement Parts
Little clip stand addon for the Plenty vaporizer by Storz & Bickel. Just clip one or two of them under the Plenty and it won't fall over anymore. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter…
A clip so you can hang up your hose after using your storz and bickel Volcano Hybrid Vaporizer. Print upright, 10+% infill. Colour and filament of your choice
A flex (tested and printed originally in 85A TPU, would love to hear how it is in other filaments) designed and tested vaporiser whip cap for stopping vapour leaking out when not in use. If you need a different diameter or design just let…
This is a container I made for my husband. It fits both brands of pen-like portable vaporizers Storm and XMax V2. I designed two versions, one with a shorter cap (tappo) and one with a longer cap that can host a smaller container for…
A little round base for you to keep your vape upright. Inside hole has a diameter of 12mm. May need to be remixed depending on your needs. Print instructions Printed at .2mm layer height.
Just a simple funnel for a dry herb vaporizer with a build in stomper. It's designed fot the Yocan Hit but maybe it will fit others, too.
This is a stand for the DaVinci IQ dry herb vaporizer. If you're using the vaporizer with the 10 mm adaptor (the mouthpiece with the stem), the stem prevents standing the vaporizer on it's end while you fill it. This stylish little stand…
You obviously need a magnet for this, the hole on the provided model should fit a 1.5mm high 4.5mm diameter magnet. If you use the second provided STL you can print it without supports, just make sure your first layer has the adhesion it…
A loading tray for six of the STAINLESS STEEL DOSING CAPSULES (.3G) sold by DaVinci.
This is to transport your 19mm e-cigarette protected from outer influences. Fits Joytec 19 or many other D19 products. Print instructions print the areas with threads with 0.12mm layerheigt the rest is printed with 0.2mm layerheight. I…
simple quick'n'dirty and thin funnel against those crumbs. use vase mode. diameter of funnel end is 14,6mm. super simple design, no rocket science, uploaded this only for the lazy. it's not very sturdy, but can be reprinted easily.
This is a funnel for the Plenty Vaporizer. It lets you use the standard Storz & Bickel grinder to dump it's content directly in the plenty's oven without making a mess. It can still be used as a regular funnel but I would suggest cutting…
A case/grip for the XMAX starry v3 vaporizer Designed for use with TPU Printed with no supports, use tree for window if necessary
A simple stand for the STORZ & BICKEL Mighty+ vaporizer. Slightly flared towards the bottom for increased stability. Includes a rather large cut-out for the USB-C port to accommodate even the thickest plugs. Available in single-direction…
2x1 Gridfinity Holder for the STORZ-BICKEL Crafty Vaporizer based on the expandable storage by Zack Freedman. This model was created using the start part from Zach Freedman and then designed to hold the Crafty, the included brush, and a…
A large, solid stand for the STORZ & BICKEL Mighty+ vaporizer. Flared towards the bottom for stability. Around 54g when printed with 100% and around 35 with 20% infill . You may have to scale it to 100.5% - 101% in your slicer for an…
Present for a friend but I thought others might like it too. its a clone of the fenix mini vaporizer i think.
the pods have dimensions of 10mm outside and 8 mm inside so maybe others fit too
Funnel for loading the CF and CFX vaporizers. Remixed based on designs from CodyDoodles
I got tired of constantly flipping the multi-tool around to have the vaporizer stand while I was prepping it. This prep tray allows you to keep things organized. It could also be used as a stand during use if you have the water pipe…
Case designed for 510 threaded vape pen (Dr. Dabber brand), two vape cartridges and the USB-A charger. It has been designed to be slightly difficult to open as you need to squeeze it just right, this is meant to be like a “child-lock”…
Designed specifically for 18mm wide glass mouthpieces like this one . Holds the vaporizer glass upright so it is easier to refill. Combined with my other project it makes refilling a breeze.
This is a smaller and cheaper replacement for the original filling system, see https://storz-bickel.com/en-us/filling-set-for-40-dosing-capsules I recomment to iron the upside of the hole-plate. 2023-08-25 Update: Fixed “Druckplatte.stl”…
A replacement for Volcano vaporizer heat (power) or air -button. Works fine printed with PLA. I used painted on supports on the protruding small side bits.
This is a 7 piece set that includes the Main body, 5 adapters, and a Vestratto Anvil Vaporizer. It is for display only and completely non functional. Makes for a great desk piece. I printed it solid in resin, you could certainly try…
DEUTSCH: Das ist eine Docking Station, ein Kapselaufbewahrerhalter und eine Befüll Station für die Dosierkapseln für den Norddampf Relict Vaporizer entwickelt. Die Befüll Station kann jedoch mit jeder Dosierkapsel mit dem Durchmesser von…
Einfache Montage für 5 Verdampferköpfe via T-Clip an ein Skadis Board. Die Köpfe sitzen exklusive der 501er Aufnahme 10mm tief im Ständer damit die Dinger nicht rausfallen wenn das Regal mal etwas wackelt. Die Aufnahmen für die 501er sind…
Just a simple Funnel for the Yllvape Angus! Should fit snugly around the bowl. Printed in PLA Any feedback is appreciated!
This is a little box for herb storage, made to fit inside the Pax Vaporizer case from this link: https://www.printables.com/model/705119-pax-23mini-vape-charger-case-combo-storage But you can always print and use it however you like, as a…
A plain vaporizer holder that allows the charging through the USB port Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0,2mm Infill: no Filament: BQ PLA Category: 3D Printer Accessories
Update: Since various friends have asked me if I can change it to one step more or one space less or 30 mm, I revised it and created it so that you can change settings with parameters. If fusion 360 is kind, it will then create the model…
I love my Extreme Q vaporizer for aroma therapy but I found that the form factor was “too big” for me. It easily tips over and takes up a lot of room on my small side table so I completely re-designed it to be shorter and more boxy so…
Just print in a medium resolution (I've used 2mm) with about 15% infill. With my Anet A6 with slowly setting it needed about 4 hours. I also used 10 Lines of brim with 0mm distance to the object to get a better adhesion.
The 3D model represents a practical tool designed to assist users in filling their vaporizer devices with precision and ease. The filling aid features a sloped backside, allowing for easy filling using a brush. Additionally, it includes a…
Use this badge to label any storage / transport cases you use for your Storz & Bickel Volcano. It has a recess of 1mm on the back, so any double-sided tape with a thickness of 1.1mm (like 3M VHB 5952) will work very well. I used an SVG of…
This is a wall mount holder and charging station for the Pax 3 Vaporizer. It's still able to charge while in the holder. I use Alien Tape for mounting. You can also use velcro or command strips. No supports needed
Handy mouthpiece designed to fit glass connectors with a 3/8ths inch outer radius. Note: Common red brass nozzles contain up to 5% lead and some makers suggest not making products which come into contact with mucus membranes with brass…
A handy funnel to help load Arizer ExtremeQ dry herb vaporizers or other bowls.
Turns a pickle jar into a filtering water diffuser for hookah or vaporizers. It attempts to split air bubbles up as much as possible to accomplish better diffusion than many other options I have seen. A gasket printed in TPU will likely…
Zum befüllen der Dosierkapsel wird der Trichter drüber gestülpt. Keine Stützstruktur nötig. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. The funnel is placed over the dosing capsule to fill it. No support structure…
Hierauf könnt ihr den Inhalt des Grinders schütten und dann in den Vaporizer füllen. Es stehen zwei verschiedene Größen zur Verfügung. Bei Bedarf könnt ihr die inneren Flächen mit feinem Schleifpapier glätten. You can pour the contents of…
A 2-in-1 device. Allows you to fill the chamber of your vaporizer with the funnel, and/or press a strong and dense pellet. Normally, due to the low density, a small amount of 0,10 g would totally overfill the chamber, leading to muted…
This is a Zen Vaporizer Capsule Magazine funnel and stuffer. With this tool you can fill all 5 capsules of the magazine at ones. There is also a funnel for a single capsule and a small stuffer tool. Print Option: Bambu Lab PLA 15% Infill…
Vape Vaporizer Mouth Piece Cover Used it for Davinci Vaporizer Fit perfect Printed with Bambulab PETG Bambulab A1
Printed with TPU, works really great. PLA should work without problems but you might have to play around with the scale to get a tight enough fit. Get in contact for a Commercial License if you want to sell these. Please respect the work…
![Herb Box for Pax Vaporizer Case [Check Description for the Case Link]](https://media.printables.com/media/prints/705919/images/5538669_7055d50e-be23-4379-96a0-053a71de9784_400f7731-c4be-42be-80da-203238f3f178/img_7357.jpg)
