1 / 2
Magnetic funnel for Fenix Pro dry herb vaporizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small funnel to load herbs into the fenix pro vaporizer, should work for similar models like the fury edge
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
You obviously need a magnet for this, the hole on the provided model should fit a 1.5mm high 4.5mm diameter magnet.
If you use the second provided STL you can print it without supports, just make sure your first layer has the adhesion it needs