Storz & Bickel Volcano Vaporizer Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 165x65x3mm badge with the iconic "Volcano" logo, to be used with e.g. storage cases.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this badge to label any storage / transport cases you use for your Storz & Bickel Volcano. It has a recess of 1mm on the back, so any double-sided tape with a thickness of 1.1mm (like 3M VHB 5952) will work very well.
I used an SVG of the Volcano logo to extrude the orange part (after fixing their designer's laziness) with a height of 1mm, then cut it out of the badge plate with an offset of 0.2mm around the logo, so that the logo fits nicely even with a bit of elephant's foot. The badge's overall thickness is 3mm, with 1mm used for the recess to hide the tape, 1mm being the actual plate, and 1mm for the recessed logo.
If you have a multimaterial printer, you should be able to print it as once piece. If not, just print both parts face down - without supports - and superglue them together.