CYMA AK suppressor.

This is a very simple MOCK airsoft suppressor i designed for very specific reasons.

i have a cyma standard ak 105 carbine.

CYMA Standard Stamped Metal AK-105 Airsoft AEG Rifle with Synthetic Folding Stock (Package: Gun Only), Airsoft Guns, Airsoft Electric Rifles - Evike.com Airsoft Superstore

 i don't know about other models but the carbine has an extended inner barrel (see pictures) making it difficult to find a suppressor that fits and holds a tracer. 

this Suppressor slides over the barrel to protect it and hold the tracer in the perfect position.

the threads for the barrel are 14x1.0 ccw and screws on no issue. the threads for the tracer are the same. 

i use an Armin lab flash nano. its 27mm in diameter. i Believe that's pretty standard but measure before printing.

for printing i used pla and its holding up well but petg would most likely be sturdier. 

i used a 0.4 nozzle and orca slicers .20 strength preset and its solid. definitely use supports. i recommend tree style if available. after the print the threads are stiff and first but be patient. mine had a small error where the opening was out of round causing inconsistent shots. i reamed the edge with a 3/8th drill bit and problem solved.

if you need a different thread leave a comment. i might make another design to allow for a screw on orange tip.

[DISCLAIMER]: this is NOT for real steel guns. not only is that a felony in most states its very dangerous as its NOT designed for the pressures generated by real firearms.

[DISCLAIMER#2]: if you print this in all black like i did, keep in mind that your replica will look like a real firearm. please use common sense. don't brandish your gun in public or near law enforcement