1 / 1
FPV cam adapter Nano to Micro (14mm to 19mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
14mm to 19mm adapter for FPV cameras.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 399
- Wydruki
- 0
- Wyświetlenia
- 1138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
14mm to 19mm adapter for FPV cameras, works for any standard Nano fpv camera. No need for any sort of supports or a brim. Tested on my runcam split 3 nano, had some crashes and shows no signs of wear.
Included v2: Is a little beefier than v1, although heavier. (Same Dimensions)
Recommendation: For the best performance and durability, it is recommended to print this adapter using TPU since it withstands crashes like a breeze.