14mm Bowl Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We needed some bowl holders for our display cases at work. So I decided to make one that didn't take days to print. I…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 311
- Wydruki
- 0
- Wyświetlenia
- 1231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
We needed some bowl holders for our display cases at work. So I decided to make one that didn't take days to print. I went through several different dimensions in the piece that grips the glass bowl. I went with a 2.5 degree angled hole that hugs the tapered glass bowl connector extremely well without much wobble.
Had this complete in around 6 hours.
Added a thinner base to the holder to cut down on printing time and materials. The original was half a inch high the thin one is a 1/4 inch high. They both still have the tapered hole to hug the bowl
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.28
Infill:
20
Filament: Sunlu PLA Blue
Category: Organization