Wago 221-2411/2401 Tool less mount (print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nifty tidy solution to hold all your inline Wago connectors whilst also being able to connect and disconnect wires.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A nifty solution for your Wago inline splices (221-2401) to be mounted or housed in a tidy fashion.
Simply print in place and insert a Wago connector, you'll hear the plastic snap but don't worry! Its designed to do that. The noise is the leaf spring working loose allowing you to insert and remove the Wago.
Designed to house up to five and as little as one connector the mount allows cables to be connected and disconnected without removing the Wago.
Additional mounts come with horizontal and vertical mounting holes intended for an M3 screw, or you can double sided tape the standard ones, whichever takes your fancy!
This model was printed with a 0.6mm Nozzle, I wouldn't recommend any larger nozzle size due to the leaf spring.
Happy Printing!