1 / 5
Wago 221-2411/2401 Tool less mount (print in place) — image 1
1 / 5

Wago 221-2411/2401 Tool less mount (print in place)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A nifty tidy solution to hold all your inline Wago connectors whilst also being able to connect and disconnect wires.

Rating
0 / 5
Likes
4
Downloads
23
Makes
0
Views
173
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

A nifty solution for your Wago inline splices (221-2401) to be mounted or housed in a tidy fashion.

Simply print in place and insert a Wago connector, you'll hear the plastic snap but don't worry! Its designed to do that. The noise is the leaf spring working loose allowing you to insert and remove the Wago.

Designed to house up to five and as little as one connector the mount allows cables to be connected and disconnected without removing the Wago.

Additional mounts come with horizontal and vertical mounting holes intended for an M3 screw, or you can double sided tape the standard ones, whichever takes your fancy!

This model was printed with a 0.6mm Nozzle, I wouldn't recommend any larger nozzle size due to the leaf spring.

Happy Printing!

Tags