Master Spool for AzureFilm Refills (Model Cinema)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MasterSpool AzureFilm Refill FilmSpool MovieReel EcoFriendly Sustainability 3DPrinting Filament PLA PETG FDM Cinema Reel
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 127
- Wydruki
- 3
- Wyświetlenia
- 339
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The FILM Spool: Reusable Master Spool for AzureFilm Refill Filaments
Tired of disposable plastic spools? Inspired by the classic look of a film reel, I redesigned the AzureFilm Master Spool to be 3D printed and perfectly compatible with their Refill Filaments. This project is the ultimate blend of the maker hobby and eco-friendliness.
This is the best way to convert your 3D printing setup to a more sustainable, low-waste system, while adding a unique, cinematic touch to your filament storage!
Key Features:
Perfect Film Reel Aesthetic: The design captures the look of a classic movie film spool.
Flawless Compatibility: Engineered for a precise and secure fit with the cardboard core of AzureFilm refills.
Eco-Friendly & Sustainable: Significantly reduce plastic waste by printing the spool once and reusing it indefinitely with cardboard refills.
Secure Assembly: Easy and secure assembly (the design is closed using a simple snap-fit).
Filament Viewport: Includes a small slot to easily check the remaining filament quantity inside.
Printing Instructions and Settings
The spool is printed in two halves. PLA is generally sufficient for this application, but you should consider using PETG or ABS if you plan to dry your filament at high temperatures, as high heat could cause the Master Spool to warp.
| Setting | Recommendation |
|---|---|
| Material | PLA or PETG (PLA is sufficient for this use). |
| Layer Height | 0.20 mm |
| Perimeters (Wall Loops) | 3 |
| Infill (Density) | 20% - 25% (Cubic/Gyroid Pattern) |
| Supports | NOT REQUIRED |