Gunpla Display Arm - Multiboard Connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard connectors for @GunplaMark's Gunpla Display Arm. Two versions, bolt-locked and a moderate weight bearing snap
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I love @GunplaMark's Gunpla Display Arm for Honeycomb Storage Wall. Problem, I use Multiboard. So I chopped off the HSW connector and spliced it onto a Bolt Lock connector and a Moderate Weight Bearing Snap.
Standard Multiboard print settings apply
- 0.20 mm layer height
- 3 walls
- 15% infill
- Infill of your choice (I like Gyroid or Adaptive Cubic)
- Print as oriented
I included a 3MF for the Bolt Locked version that has supports laid out and a support blocker in the middle, so please use that.
I have tested these with HG and RG models hanging up on my Multiboard for months now. Haven't had a chance to test them with MG models yet, but they should hold.
Standard Multiboard License applies
https://docs.google.com/document/d/1C0-Iyxydqk_d2I3o_5ualJ9Ywt9gwVdl9eukvC8JeKA/edit?tab=t.0