1 / 6
Filament Swatch with key tests
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model presents Filament Swatch with key tests - created in Bambu Studio.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Filament Swatch with key tests included i.e.
- Layer Thickness 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 mm
- Holes 10 / 7.5 / 5 / 2 mm
- Walls 3 / 2 / 1.5 / 1 mm
- Convex bodies: Cone, half-cylinder and half-sphere
- Round shapes
- Sharp inner shape
- Hole for Keychain / Keyring
The model is easy to print and can be used for various types of Filament.
The printing should take ~30mins depending on applied quality settings and ~12 g weight.
Dedicated hole for Keyring can be used to keep all samples together.
Print should be fine with standard settings however here you can find some specs I used in examples from photos - you can consider to use some of them :)
- Diameter 0.4
- Layer height 0.15
- Line width for Top Surfaces 0.35
- Arachne Wall generator
- Minimum wall width 70%
- Monotonic Patterns (both Top and Bottom)
- + For Silk filament, I recommend to decrease speed:
- Outer wall = 70 mm/s
- Inner wall = 100 mm/s
- Top surface = 100 mm/s
- Gap infill = 150 mm/s
Enjoy!