1 / 6
Filament Swatch with key tests
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model presents Filament Swatch with key tests - created in Bambu Studio.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Filament Swatch with key tests included i.e.
- Layer Thickness 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 mm
- Holes 10 / 7.5 / 5 / 2 mm
- Walls 3 / 2 / 1.5 / 1 mm
- Convex bodies: Cone, half-cylinder and half-sphere
- Round shapes
- Sharp inner shape
- Hole for Keychain / Keyring
The model is easy to print and can be used for various types of Filament.
The printing should take ~30mins depending on applied quality settings and ~12 g weight.
Dedicated hole for Keyring can be used to keep all samples together.
Print should be fine with standard settings however here you can find some specs I used in examples from photos - you can consider to use some of them :)
- Diameter 0.4
- Layer height 0.15
- Line width for Top Surfaces 0.35
- Arachne Wall generator
- Minimum wall width 70%
- Monotonic Patterns (both Top and Bottom)
- + For Silk filament, I recommend to decrease speed:
- Outer wall = 70 mm/s
- Inner wall = 100 mm/s
- Top surface = 100 mm/s
- Gap infill = 150 mm/s
Enjoy!