80-20 Mount for 221-2401 Wago connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple block that you can mount to 80-20 that hides your 221-2401 Wago connectors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a simple block that you can mount to 80-20 that hides your 221-2401 Wago connectors. The connectors are held in with a small set screw. This holds 4 connectors but could be made to hold more if needed.
Once you have attached your wires to the connector you can slide the connector in the block and set screw it in place. One wire from each connector would have to slide through the block before making the connection in the Wago block. This is for 10 series 80-20.
No supports needed if you print it on end.
Link Below for the Wago Creators Site.
https://wago-creators.com/design/607