Yet another servo driven fpv tiny tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another fpv tiny tank designed for lego tracks (x939) and 360 servos. Wheels are designed to be directly screwed on to…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Another fpv tiny tank designed for lego tracks (x939) and 360 servos.
Wheels are designed to be directly screwed on to modified mg90 servos. For the free wheel a standard 3x8x4mm ball bearing can be inserted for reduced friction or use just a screw.
The top and bottom halves are designed to be magnetically connected with 7x4mm rod magnets but could also be connected with printed rods if you prefer.
Additional top servo for shovels or camera arms, includes a design file that allows a camera with 24mm holes to be screwed directly on the shovel arm.
Parts i have used:
Receiver: https://www.banggood.com/2_4G-8CH-D8-Mini-FrSky-Compatibel-Receiver-With-PWM-PPM-SBUS-Output-p-1140478.html?p=6F02122925841201511N Servos: https://www.banggood.com/Tower-Pro-MG90S-Metal-Gear-RC-Micro-Servo-For-RC-Model-p-74870.html?p=6F02122925841201511N 5v Regulator: https://www.banggood.com/5X-DC-Boost-Converter-2A-Power-Supply-Module-2V-24V-To-5V-28V-Adjustable-Regulator-Board-p-1181876.html?p=6F02122925841201511N
The camera was an eachine ef01 that is not available anymore but most other AIO FPV cams should fit.
Video:
Print Settings
Printer:
M150
Rafts:
No
Supports:
Yes
Notes:
Print the top cover and arm with supports.
Top cover upside down and arm laying on the side for best strength and look.
Category: R/C Vehicles