GIRO.HUE - Play Light Bar Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GIRO.HUE - Play Light Bar Mount General This bracket was designed to be mounted on back of the Philips Hue Play…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 999
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
GIRO.HUE - Play Light Bar Mount
General
This bracket was designed to be mounted on back of the Philips Hue Play Lightbar Mount.
You will not need additional screws, nuts or washers. But if you lost the regular screw which comes included to the package then you will need the following screw.
Additional screws, nuts and washers per bracket
1x M3x5 with a Flat Head
Printing
I would recommend to use 3 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 20% infill to give it enough stiffness and prevent it from warping over time. I used Gyroid infill with the Prusa Slicer and works fluently for a longer time now.
Firmware adjustments
No Formware Adjustments needed.
Additional Information
Let me know if there are any kind of problems with the bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
