Vega 4x5 Mamiya Press Lomograflok Lens Cone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lens cone and mounting frame for using Mamiya Press lenses with the Vega 4x5 camera and the Lomograflok back.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use my Mamiya Press lenses with my Vega 4x5 and Lomograflok back, so I created this adapter that places the lens at the perfect distance from the Instax Wide film to achieve infinity focus. With the help of a shifted ground glass holder and a Graflok-compatible film holder, it's super easy to achieve perfect focus and framing before swapping over to the Lomograflok back.
Print Settings
Material: PLA or PETG. Matte black is best to avoid light transmission
Wall Loops: 3
Infill: 15%
Infill pattern: cubic
Bottom shell layers: 5
Assembly
Mount the lens cone to the frame using 4 M3 screws.
Screw another M3 screw into the lens mount, but just enough so it doesn't fall out.
Mount your lens to the cone by inserting and turning clockwise
Tighten the screw on the lens mount to prevent the lens from turning counter-clockwise and falling out.
Mount the whole assembly in your Vega 4x5 just like you would a bellows.