1 / 5
Vega 4x5 Mamiya Press Lomograflok Lens Cone
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lens cone and mounting frame for using Mamiya Press lenses with the Vega 4x5 camera and the Lomograflok back.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 35
- Makes
- 0
- Views
- 514
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use my Mamiya Press lenses with my Vega 4x5 and Lomograflok back, so I created this adapter that places the lens at the perfect distance from the Instax Wide film to achieve infinity focus. With the help of a shifted ground glass holder and a Graflok-compatible film holder, it's super easy to achieve perfect focus and framing before swapping over to the Lomograflok back.
Print Settings
- Material: PLA or PETG. Matte black is best to avoid light transmission
- Wall Loops: 3
- Infill: 15%
- Infill pattern: cubic
- Bottom shell layers: 5
Assembly
- Mount the lens cone to the frame using 4 M3 screws.
- Screw another M3 screw into the lens mount, but just enough so it doesn't fall out.
- Mount your lens to the cone by inserting and turning clockwise
- Tighten the screw on the lens mount to prevent the lens from turning counter-clockwise and falling out.
- Mount the whole assembly in your Vega 4x5 just like you would a bellows.