Speakerphone Wall Hanger

At my work, we are adding audio visual meeting systems to several of our meeting rooms. We use primary Zoom and MS Teams for our workers to conduct hybrid meetings.

We purchased this speakerphone from Amazon as part of the A/V equipment: https://www.amazon.com/gp/product/B08XWZ81CW/ref=ox_sc_act_title_1?smid=A1GON0SSAE99NT&psc=1

I was asked to design and 3D print a suitable wall mount for to hold the speakerphone while the A/V system is not in use.

This is my design. I created a few variants to accommodate other hardware.

Filename:

Version 1.2 M3 

Hardware hole size: M3 / 1/8” / #5

Countersink hole size: 6.5mm / 1/4”

Countersink hole depth: 3mm / 1/8”

Version 1.2 M3 LCS (Untested) 

Hardware hole size: M3 / 1/8” / #5

Countersink hole size: 8mm / 5/16”

Countersink hole depth: 3mm / 1/8”

Version 1.2 M4 (Untested) 

Hardware hole size: M4 / 5/32” / #8

Countersink hole size: 9mm / 23/64”

Countersink hole depth: 4.5mm / 11/64”

Here are the printer settings I used:

Slicer: Orca Slicer 2.3.0

Nozzle Size 0.4mm

Initial Layer Height: 0.28mm

Layer Height: 0.2mm

Infill: 15% Tri-hexagon

Wall, Top, & Bottom Thickness: 1.4mm

Supports: Yes, Tree

Adhesion: Skirt

Material: Voxel PLA+ HS Gray

Extruder Temp: 200 C

Bed Temp: 60 C

Total Filament Used: 76 grams

Notes:

This project was designed in Onshape under a maker account. Per the terms of the account, this design cannot be commercially used. To learn about using Onshape, I recommend this series by Teaching Tech.