Speakerphone Wall Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall hanger for a speakerphone unit used for an audiovisual meeting room setup.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
At my work, we are adding audio visual meeting systems to several of our meeting rooms. We use primary Zoom and MS Teams for our workers to conduct hybrid meetings.
We purchased this speakerphone from Amazon as part of the A/V equipment: https://www.amazon.com/gp/product/B08XWZ81CW/ref=ox_sc_act_title_1?smid=A1GON0SSAE99NT&psc=1
I was asked to design and 3D print a suitable wall mount for to hold the speakerphone while the A/V system is not in use.
This is my design. I created a few variants to accommodate other hardware.
Filename:
Version 1.2 M3
Hardware hole size: M3 / 1/8” / #5
Countersink hole size: 6.5mm / 1/4”
Countersink hole depth: 3mm / 1/8”
Version 1.2 M3 LCS (Untested)
Hardware hole size: M3 / 1/8” / #5
Countersink hole size: 8mm / 5/16”
Countersink hole depth: 3mm / 1/8”
Version 1.2 M4 (Untested)
Hardware hole size: M4 / 5/32” / #8
Countersink hole size: 9mm / 23/64”
Countersink hole depth: 4.5mm / 11/64”
Here are the printer settings I used:
Slicer: Orca Slicer 2.3.0
Nozzle Size 0.4mm
Initial Layer Height: 0.28mm
Layer Height: 0.2mm
Infill: 15% Tri-hexagon
Wall, Top, & Bottom Thickness: 1.4mm
Supports: Yes, Tree
Adhesion: Skirt
Material: Voxel PLA+ HS Gray
Extruder Temp: 200 C
Bed Temp: 60 C
Total Filament Used: 76 grams
Notes:
This project was designed in Onshape under a maker account. Per the terms of the account, this design cannot be commercially used. To learn about using Onshape, I recommend this series by Teaching Tech.