C3 Corvette LED reverse light mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an LED mount for aftermarket reverse lights (Available Here). Mounting holes for the LED bar are sized for M3…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is an LED mount for aftermarket reverse lights (Available Here).
Mounting holes for the LED bar are sized for M3 screws / nuts.
The hole in the center is for running the cable through. I recommend filling the void with silicone sealant to prevent moisture issues.
The bracket slides over a piece of frame near the spare tire carrier, and is secured with two 12mm magnets (Available Here). There is a pair of indentations inside the slot that the magnets can be glued into place
The positioning of these brackets is near the mufflers on a c3 Corvette, but it should be far enough away to avoid any melting issues, but I recommend printing in at least petg, if not something more heat resistant.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
40
Filament: Atomic Filament PETG Black
Category: Automotive