C3 Corvette LED reverse light mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an LED mount for aftermarket reverse lights (Available Here). Mounting holes for the LED bar are sized for M3…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This is an LED mount for aftermarket reverse lights (Available Here).
Mounting holes for the LED bar are sized for M3 screws / nuts.
The hole in the center is for running the cable through. I recommend filling the void with silicone sealant to prevent moisture issues.
The bracket slides over a piece of frame near the spare tire carrier, and is secured with two 12mm magnets (Available Here). There is a pair of indentations inside the slot that the magnets can be glued into place
The positioning of these brackets is near the mufflers on a c3 Corvette, but it should be far enough away to avoid any melting issues, but I recommend printing in at least petg, if not something more heat resistant.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
40
Filament: Atomic Filament PETG Black
Category: Automotive