Amplug Headphone Amp holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holding tray for the Vox Amplug headphone amp. This works with both the old and new versions of the Amplug.…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a holding tray for the Vox Amplug headphone amp. This works with both the old and new versions of the Amplug. It has two slots to hold guitar picks.
This mounts to a guitar stand via thin zip ties. The channel in the mounting bracket is sized for small zip ties (1mm thick x 3mm tall).
The mount is a separate piece from the main tray body to allow the builder to decide if it should mount on the long or short side of the tray.
Works with guitar stands that have a post diameter up to 23mm
Feel free to remix for larger zip ties if needed
For those looking to mount this on a wall, TBG3DESIGNS has a version that accepts screws. https://www.thingiverse.com/thing:4655575
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
10%
Post-Printing
Assembly
The mounting bracket is printed as a separate piece to allow you to decide what orientation you want the tray to be relative to the mount and post on your guitar stand.
Once you decide where you want the bracket to attach to the tray, the two should be super glued together.Category: Hobby