Small relay box for ESP32 project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small box that can fit a cheap relayboard plus a ESP32 mini board, both sides have an hole for a wire
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This compact enclosure is designed to house both a relay board and an ESP32-C3 Mini. The base and endcap feature wire passthrough holes, with one sized perfectly for a USB cable. The ESP32-C3 Mini is mounted to the side of the relay using double-sided tape for a snug, low-profile fit.
The default box length is 75 mm, but I included a STL file can be easily scaled in height to accommodate different setups (in that case you will need two endcaps). For fast, efficient printing, the design supports vase mode — provided your nozzle is large enough to produce a sufficiently thick wall in a single pass. (I used a 0.8mm nozzle)