Fizik Saddle AirTag Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Apple AirTag Mount for Fizik Saddles
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Instructions:
- I'd suggest you use ”Weatherproof" Filament to print the Parts from - Don't want the parts to become brittle from UV / the Cold or melt in the heat of the Sun 😁
- Print with the usual Voron recommended 4x Perimeter / 40% Infill Settings.
- Layer Height doesn't really matter but I suggest the usual 0.2mm
- The Parts come prealigned and shouldn't require Supports despite some steep Overhangs.
BOM:
- 4x Voron Style M3 Heat Set Inserts
- 2x M3x35mm Button Head ( or Socket Head ) Cap Screws
- 2x M3x12mm Countersink Screws
Assembly & Installation Instructions:
Install 4x M3 Heat Set Inserts into the Main Body using a Soldering Iron ⬇
Install the Apple AirTag into the Main Body ⬇
Add AirTag Clamp and secure with 2x M3x35mm Button Head ( or Socket Head ) Cap Screws ⬇
( If you decide to “permanently” attach the Assembly using Glue - described in the next Step - these Screws will need to be removed with a suitably long Tool - perhaps even requiring an extension - to retrieve the AirTag for Battery Replacement )
Install Assembly to Seat Post Rails ⬇
( Optionally - Add Plastic Glue to the blue marked Areas to prevent quick removal of the Assembly in case of Theft )
Install 2x M3x12mm Countersunk Screws to finish the Installation ⬇
